Product Description
Rubber Plastic Single Screw Extrusion Extruder Industrial Reducer Gearbox
1. Description
It is a kind of special gearbox researched and developed by importing the most advanced technology of the hard teeth-surface in the world. For recent 10 years, they have been widely used in top and middle grade plastic, rubber and chemical fiber extruders, sold well in the domestic and exported to other countries.
2. Product Features
1). High strength alloy steel gear surface and thrust block specially designed for plastic screw extruder
2). Noise Level: Low type 65-80 db, smooth and stable in running
3). Compact, high in bearing capacity, stable in transmission, high efficiency
4). By forced lubrication and cooling system.
5). Bearing: Chinese famous brand bearing. But other brand bearing is a aviable if need.
6). Unique modular design easy for cross country production, low stock, short delivery time.
7). The seal of output shaft part adopts double oil seal with perfect oil leaking resistance.Reliable sealing and more widely applicable to industry.
3. Technical Parameters
|
ZLYJ series |
Ratio Range |
Input Power (KW) |
Input speed (RPM) |
Output speed (RPM) |
Output Torque (N.M) |
Axial Thrust(KN) |
Screw Diameter(mm) |
|
112 |
8/10/12.5 |
5.5 |
800 |
100 |
510 |
35 |
Ø35 |
|
133 |
8/10/12.5/14/16/18/20 |
8 |
800 |
100 |
764 |
39 |
Ø50/45 |
|
146 |
8/10/12.5/14/16/18/20 |
11 |
1000 |
100 |
1050 |
54 |
Ø55 |
|
173 |
8/10/12.5/14/16/18/20 |
18.5 |
900 |
90 |
1962 |
110 |
Ø65 |
|
200 |
8/10/12.5/14/16/18/20 |
30 |
1000 |
80 |
3581 |
155 |
Ø75 |
|
225 |
8/10/12.5/14/16/18/20 |
45 |
1000 |
80 |
5371 |
180 |
Ø90 |
|
250 |
8/10/12.5/14/16/18/20 |
55 |
1120 |
70 |
7503 |
192 |
Ø105 |
|
280 |
8/10/12.5/14/16/18/20 |
75 |
960 |
60 |
7643 |
258 |
Ø110/105 |
|
315 |
8/10/12.5/14/16/18/20 |
85 |
960 |
60 |
13528 |
287 |
Ø120 |
|
330 |
8/10/12.5/14/16/18/20 |
110 |
960 |
60 |
17507 |
360 |
Ø130/150 |
|
375 |
8/10/12.5/14/16/18/20 |
132 |
960 |
60 |
21008 |
390 |
Ø150/160 |
|
420 |
8/10/12.5/14/16/18/20 |
170 |
960 |
60 |
26995 |
430 |
Ø165 |
|
450 |
8/10/12.5/14/16/18/20 |
212 |
1200 |
60 |
33745 |
540 |
Ø170 |
|
500 |
8/10/12.5/14/16/18/20 |
288 |
1200 |
60 |
45840 |
756 |
Ø180 |
|
560 |
8/10/12.5/14/16/18/20 |
400 |
1200 |
60 |
63667 |
830 |
Ø190 |
|
630 |
8/10/12.5/14/16/18/20 |
550 |
1200 |
60 |
87605 |
880 |
Ø200 |
4.Dimension
5.Configuration
Company Overview
Certificates
About Greensky Mechanical
HISTORY: Greensky is a mechanical brand of CZPT Power Co., Ltd. With over 10 years’
mechanical manufacturing experiences, CZPT Power always strictly stands on the
principle of Best Customer Satisfaction.
QUALITY: Material Inspection, Production Control, Finished Goods Test, Pre-dellivery Inspection
MISSION: “Once and forever” is our goal to serve customers in the world. Once we do
business with customer, we will do business forever.
MARKET: 30 different countries, mainly Germany, Austria, Japan, USA and Middle-East.
DELIVERY: 100% on-time delivery Guaranteed.
SERVICES: Fast response in English, German, Japanese and Chinese languages.
OEM: Customized orders are welcome at CZPT Power.
Exhibitions
FAQ
1 Q:What infomation should I tell you to confirm the gearbox?
A: Photo or drawing B:Power and output speed C:Service factor D:Order quantity.
2 Q: What if I don’t know which gearbox I need?
A:Don’t worry, please tell us about such information as power, torque, output speed, dimension and drawing, our team will help you find the right one.
3 Q:How long should I wait for the feedback after I send the enquiry?
A: Within 12 hours.
4 Q:What is your product warrenty period of gearboxes?
A:We offer at least 1 year warrenty.
5 Q:What industries are your gearboxes applied to?
A: They are widely used in the areas like plastic, rubber, crane, conveyor, etc.
6. Q:How to delivery:
A: By sea – Our sales team find suitable forwarder for buyers.
By air – Buyer offer collect express account, or our sales team find suitable express for buyers. (Mostly for sample)
Others – We arrange to deliver goods to some place in China appointed by buyers.
We hope you will enjoy cooperating with us.
| Application: | Plastic Extruder |
|---|---|
| Function: | Change Drive Torque |
| Layout: | Helical |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Double-Step |
| Samples: |
US$ 500/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Key Factors for Selecting a Helical Gearbox
Choosing the right helical gearbox for an application involves considering several key factors:
- Load and Torque: Evaluate the maximum load and torque requirements to ensure the gearbox can handle the application’s demands.
- Speed Range: Determine the required speed range and ensure the gearbox’s gear ratios can accommodate it.
- Efficiency: Helical gearboxes are known for their high efficiency. Select a gearbox with efficiency ratings that meet your application’s needs.
- Space Constraints: Consider the available installation space and choose a compact gearbox that fits within the available dimensions.
- Mounting Position: The mounting position affects lubrication, cooling, and overall performance. Ensure the gearbox is suitable for the desired mounting orientation.
- Service Life: Choose a gearbox with a service life that matches your application’s expected lifespan.
- Backlash: Evaluate the allowable backlash, which affects precision and positioning accuracy.
- Noise and Vibration: Assess the acceptable noise and vibration levels and choose a gearbox with suitable characteristics.
- Environmental Conditions: Consider factors like temperature, humidity, and dust levels to ensure the gearbox can operate reliably in the application environment.
- Maintenance: Factor in maintenance requirements and choose a gearbox with manageable maintenance needs.
- Cost: Balance performance with budget constraints to find a gearbox that offers the best value for your application.
By carefully evaluating these factors, you can select a helical gearbox that optimally meets your application’s requirements and ensures efficient and reliable operation.
Materials Used in Manufacturing Helical Gears
Helical gears are commonly manufactured using a variety of materials to meet specific requirements for strength, durability, wear resistance, and other mechanical properties. Some of the materials commonly used for manufacturing helical gears include:
- Steel: Various types of steel, such as carbon steel, alloy steel, and stainless steel, are frequently used due to their high strength, durability, and wear resistance. They are suitable for a wide range of applications and provide excellent performance.
- Cast Iron: Cast iron gears are known for their cost-effectiveness and good wear resistance. They are often used in applications where heavy loads and moderate speeds are involved.
- Brass: Brass gears are chosen for applications that require quiet operation and low-speed applications. They offer good corrosion resistance and are commonly used in smaller machinery.
- Bronze: Bronze gears are valued for their excellent wear resistance and compatibility with lubricants. They are often used in heavy-duty applications and situations where high loads are encountered.
- Plastics and Polymers: Certain plastic materials, such as nylon and acetal, are used for gears that require low noise levels and resistance to chemicals and corrosion. They are suitable for applications where lightweight components are essential.
- Aluminum: Aluminum gears are lightweight and corrosion-resistant, making them suitable for applications where weight reduction and corrosion resistance are priorities.
The choice of material depends on factors such as the application’s load, speed, environment, and desired performance characteristics. Manufacturers select materials that best align with the specific requirements of the helical gear system, ensuring optimal function and longevity.
Helical Gearbox: Overview and Working Mechanism
A helical gearbox is a type of mechanical device used to transmit power and motion between rotating shafts. It employs helical gears, which are cylindrical gears with teeth that are cut at an angle to the gear axis. This design feature gives helical gearboxes their distinctive helical shape and provides several advantages in terms of efficiency, smoothness, and load-bearing capabilities.
The working mechanism of a helical gearbox involves the interaction of helical gears, which mesh together to transmit torque and motion. Here’s how it works:
- Gear Tooth Engagement: When power is applied to the input shaft of the gearbox, the helical gear on the input shaft meshes with the helical gear on the output shaft.
- Helical Angle: The helical angle of the gear teeth causes a gradual engagement between the teeth, resulting in a smooth and quiet meshing process compared to straight-cut gears.
- Torque Transfer: As the input gear rotates, it transfers rotational force (torque) to the output gear through the meshing of their helical teeth.
- Direction of Rotation: Depending on the arrangement of the helical gears, the output shaft’s direction of rotation can be the same as or opposite to that of the input shaft.
- Load Distribution: The helical design allows for multiple teeth to be engaged at any given moment, distributing the load more evenly across the gears. This results in higher load-carrying capacity and reduced wear on gear teeth.
- Efficiency: Helical gearboxes are known for their high efficiency due to the gradual tooth engagement and larger contact area, resulting in minimal energy loss as compared to other gear types.
Helical gearboxes find applications in various industries where smooth operation, high efficiency, and compact design are important. They are commonly used in machinery, conveyors, automotive transmissions, industrial equipment, and more.
editor by CX 2023-10-19
China best Gearbox for Plastic Extruding, Helical Gear Reducer supplier
Product Description
About us :
ZHangZhoug pinbo plastic machinery co.,ltd is located in HangZhou HangZhou city with brand of PYM(Former HangZhou yumin machine screw co.ltd since 1988). The company is specialized in making screw barrel, gearbox zlyj series, t die, filter and extruder machine. It has become one of the largest supplier of main parts in HangZhou city which is the basement of plastic machines.
Key words: Gearbox, CZPT series, speed reducer, extruder gearbox, plastic gearbox, plastic extruder gearbox, plastic extrusion machine gearbox, hard tooth gearbox, gearbox for plastic extruder, gearbox for plastic extrusion machine, plastic extruder machine, plastic extrusion machinery, plastic extruder, plastic wire drawing machine, plastic tape drawing machine
Brief introduce
Series CZPT decelerator is a drive with high-precision and hard tooth surface and thrust bearing designed to match with screw extruder. It is designed according to the specification in code ZBJ19009-88, featured with high-strength alloy steels for CZPT and shaft parts. The gear is treated with carburation, quenching and gear grinding. Gear wheel precision is GB10095-88, class 6. Tooth surface hardness is HRC54-62. A thrust bearing with over-specificaiton is mounted on the front end of the hollow output shaft to carry back backblow of screw. Domesic quality products are selected for the standard parts such as bearing and oil seal that may also use inported products as required by customer. The whole unit is compact, has high carry capacity, provide stable drive with low noise and high efficiency. The performance of this products is up to the advanced level and a good substitute for imported products of the same kind.
ZLYJ series 133, 146, 173, 200, 225, 250, 280, 315, 330 are available.
Why choose us?
A> long time experience and history
B> long time nitriding treatment and heating treatment by itself
C>advanced Fanuk series CNC computer-controlled milling machines
D>depth hole drilling machine in 8meters length, which ensure the straigtnss of barrel inside.
E> CAD drawing confirmation before start making
F> Prompt after sale service
G>Land owner and registration capital 25, 000, 000RMB
Packaging&shipping
Packing: Wrapped up by film in wooden cases
Port Departure: HangZhou / ZheJiang Port
Delivery time: 25 working days after order confirm for product
Payment: L/C, T/T, Western Union, Money Gram
If there is any problem, you can contact with us at any time, we will reply you as soon as possible!
| Warranty: | 1 Year |
|---|---|
| Plastic Processed: | ABS |
| Product Type: | Extrusion Molding Machine |
| Screw: | Single-Screw |
| Screw Channel Structure: | Deep Screw |
| Exhaust: | Exhaust |
| Customization: |
Available
| Customized Request |
|---|
Types of Helical Gear Arrangements
Yes, there are different types of helical gear arrangements available to suit various applications and requirements. Some of the common helical gear arrangements include:
Parallel Shaft Arrangement: In this arrangement, the axes of the driving and driven shafts are parallel to each other. It is the most straightforward configuration and is often used in applications where space is not a constraint, and the gearboxes can be placed side by side.
Right-Angle Shaft Arrangement: In a right-angle arrangement, the driving and driven shafts are positioned at a 90-degree angle to each other. This arrangement is space-saving and is commonly used in applications where the layout requires a change in direction of the power transmission.
Double Helical Gear Arrangement (Herringbone Gears): Double helical gears consist of two sets of helical teeth facing each other. This arrangement helps to cancel out axial forces and reduces the net thrust load on bearings. It is often used in heavy-duty applications to minimize wear and vibration.
Crossed Helical Gear Arrangement (Screw Gears): In this configuration, the axes of the driving and driven shafts are neither parallel nor intersecting. It is suitable for applications requiring non-parallel and non-intersecting shafts.
The choice of helical gear arrangement depends on factors such as available space, power transmission requirements, and the desired layout of the machinery or equipment. Each arrangement has its advantages and disadvantages, and selecting the appropriate one is crucial for achieving optimal performance and efficiency.
Can Helical Gearboxes Be Retrofitted into Existing Machinery Designs?
Yes, helical gearboxes can often be retrofitted into existing machinery designs, providing an opportunity to upgrade the performance, efficiency, and reliability of older equipment. Here are the key points to consider when retrofitting helical gearboxes:
1. Compatibility: Before proceeding with a retrofit, it’s essential to ensure that the new helical gearbox is compatible with the existing machinery in terms of size, mounting, and shaft connections. Proper measurements and analysis are necessary to avoid any misalignment or fitment issues.
2. Space Considerations: Helical gearboxes may have a different physical profile compared to the original gearboxes. Engineers need to assess the available space in the machinery and confirm that the new gearbox will fit without major modifications.
3. Shaft Alignment: Proper shaft alignment is crucial to ensure smooth and efficient operation. During the retrofit, it’s important to align the new helical gearbox with other components in the system to prevent premature wear, noise, and vibration.
4. Power and Torque Ratings: The power and torque ratings of the helical gearbox should match or exceed the requirements of the machinery. This ensures that the new gearbox can handle the loads and stresses that the machinery may encounter.
5. Performance Improvements: Retrofitting with helical gearboxes can lead to improved efficiency, reduced noise, and smoother operation. These benefits can positively impact the overall performance and lifespan of the machinery.
6. Engineering Expertise: Retrofitting involves careful planning, engineering analysis, and implementation. Working with experienced engineers or gearbox specialists is advisable to ensure a successful retrofit without compromising the integrity of the machinery.
7. Cost-Benefit Analysis: Assessing the costs of the retrofit, including the cost of the new gearbox, installation, downtime, and potential modifications, is essential. Comparing these costs to the anticipated benefits of improved performance and efficiency will help make an informed decision.
8. Maintenance Considerations: Retrofitting may also impact maintenance practices. It’s important to understand any changes in lubrication requirements, inspection intervals, and servicing needs that come with the new gearbox.
Conclusion: Retrofitting helical gearboxes into existing machinery designs can be a cost-effective way to enhance the performance and extend the lifespan of equipment. However, careful planning, engineering analysis, and professional expertise are crucial to ensure a successful retrofit that delivers the desired improvements without causing unforeseen issues.
Helical Gear Meshing and Its Benefits
Helical gear meshing refers to the engagement of two helical gears with inclined teeth. The teeth are cut at an angle to the gear axis, creating a helix shape. When these gears mesh, the inclined teeth gradually come into contact, allowing for smoother and quieter operation compared to straight-toothed gears.
The benefits of helical gear meshing include:
- Reduced Noise: The gradual contact between helical gear teeth minimizes impact and noise during engagement, resulting in quieter operation. This is particularly advantageous in applications where noise reduction is essential, such as industrial machinery and automotive transmissions.
- Smooth Operation: Helical gears provide smoother and more continuous motion due to the gradual engagement of teeth. This feature makes them suitable for applications that require precise and controlled movement, such as CNC machines and conveyor systems.
- Higher Load Capacity: The helical tooth geometry allows for greater tooth contact area, distributing the load over a larger surface. This results in higher load-carrying capacity and improved durability, making helical gears suitable for heavy-duty applications.
- Efficient Power Transmission: Helical gears transmit power more efficiently due to their smooth engagement and increased contact area. This efficiency contributes to reduced energy consumption and heat generation in gearboxes.
- Less Vibrations: The gradual meshing of helical gears reduces vibrations, resulting in smoother operation and reduced wear and tear on gear teeth and bearings. This is especially important for extending the lifespan of the gearbox.
Overall, helical gear meshing offers numerous benefits, including reduced noise, smoother operation, higher load capacity, efficient power transmission, and reduced vibrations. These advantages make helical gears a popular choice in various industrial applications where performance, durability, and reliability are crucial.
editor by CX 2023-09-11
China Standard Zlyj146 173 225 250 Gear Box Helical Reducer High Torque Transmission Parts Gearbox for Plastic Screw Extruder Screw manufacturer
Product Description
Product Description
ZLYJ gearbox series are transmission devices, which are specially designed for single-screw extruder with high precision, hard gear surface, accompany with thrust. Adopting the technical specifications stipulated in JB/T9050. 1-1999, all CZPT gearboxes are designed accordingly.
Product Parameters
Detailed Photos
Machine Parts
Name: High Quality CZPT Gearbox
Original: China Gear material: high alloy steel low carbon (20CrMnTi)The interface is hardened, precision-ground and hard-chrome-plated to 870HV hardness and Ra 0.8-1.6µm roughness, so the shaft-seal is super hard, resists wear and corrosion, and very durable.
Main Features
Made of carburizing steel (Forging), go through normalization heat treatment for forged carburizing steel; and gear faces are also nitride-treated to at least 60HRC hardness for optimal rigidity and carburizing depth 0.8-1.1MM and wear resistance.
Single Screw Extruder Gearbox
Our CZPT gearbox for single screw extruder adopts high strength alloy steel material and the gear is of high accuracy. It is less
noisy, work quietly and smoothly. So it is a longer service life.
Gearbox casting body
1. we prepare enough casting body in our workshop to guarantee the delivery time.
2. this is our new gearbox casting body design.
3. fast delivery time and high quality
Heat treatment furnace
We have own heat treatment for the gears and gearshaft, so it’s easy for us to control the quality and the quality is more gurantee.
Packaging & Shipping
1)Packing: Wrapped up by film in wooden cases
2)Port Departure: HangZhou Port
3)Delivery time: 25 working days CZPT receipt of 30% deposit(days based on your quantity)
We use strong plywood or wooden case for all our products.
FAQ
Q1. Are you a trading company or a manufacturer?
We are a BSCI&ISO-9001 certificated manufacturer.
Q2. Can I place the customized order for different sizes, colors, materials,packings….?
Yes, all the customized orders are welcomed.
Q3. Could I get a QC report before delivery?
Yes, the specific QC reports will be sent to you before delivery.
Q4. Can I get a lower price if I place a larger order?
Yes, the price will be modified according to your order quantities.
| Heat Treatment: | Carburising/Quenching/Gear Griding |
|---|---|
| Gearing Arrangement: | Helical |
| Advantage: | Low MOQ, High Quality |
| Gear Accuray: | Less Than 6 |
| Gear Material: | Low Carbon High Alloy Steel |
| Mount Postion: | Horizonal or Vertical |
| Customization: |
Available
| Customized Request |
|---|
Differences Between Helical Gearboxes and Spur Gearboxes
Helical gearboxes and spur gearboxes are two common types of gearboxes used in various applications. Here are the key differences between them:
- Tooth Desi
Precision and High-Accuracy Applications of Helical Gearboxes
Helical gearboxes are well-suited for precision and high-accuracy applications due to their unique design and performance characteristics:
- Helical Gearing: The helical gears in these gearboxes offer smooth and continuous meshing, resulting in reduced backlash and improved positioning accuracy.
- Efficiency: Helical gearboxes are known for their high efficiency, which minimizes energy losses and heat generation. This is crucial for maintaining precision in applications where even small deviations can have significant impacts.
- Noise and Vibration: The helical gear tooth engagement helps in reducing noise and vibration levels, making them suitable for environments where quiet operation is required.
- Load Distribution: Helical gears distribute load across multiple teeth, minimizing localized wear and extending the lifespan of the gearbox.
- Smooth Motion: Helical gearboxes provide smoother motion transitions, which is crucial in precision applications where jerky or sudden movements are undesirable.
- Positional Accuracy: The reduced backlash and improved meshing characteristics of helical gears contribute to higher positional accuracy, making these gearboxes ideal for applications such as CNC machines, robotics, and medical equipment.
- Compact Design: Helical gearboxes can achieve high gear ratios in a relatively compact form factor, making them suitable for applications where space is limited.
Examples of precision applications where helical gearboxes are commonly used include CNC machining, robotics, semiconductor manufacturing, medical equipment, and metrology devices. The combination of efficiency, smooth operation, and accuracy makes helical gearboxes a preferred choice for achieving consistent and reliable performance in such applications.
gn:
The main difference between helical and spur gearboxes lies in their tooth design. Helical gearboxes feature helical teeth that are cut at an angle to the gear axis, while spur gearboxes have straight-cut teeth that run parallel to the gear axis. - Engagement: Helical gearboxes offer a gradual and smooth engagement of teeth due to their helical tooth design. This results in reduced noise and vibration compared to spur gearboxes, which can have more abrupt and noisy tooth engagement.
- Load Distribution: Helical gearboxes have a higher contact ratio between teeth at any given time, which leads to better load distribution across the gear teeth. Spur gearboxes, on the other hand, have fewer teeth in contact at a time, potentially leading to higher stress on individual teeth.
- Efficiency: Helical gearboxes tend to be more efficient than spur gearboxes due to the helical tooth design, which reduces friction and energy losses during gear meshing. The gradual engagement of helical teeth contributes to this higher efficiency.
- Noise and Vibration: Helical gearboxes generate less noise and vibration compared to spur gearboxes. The helical tooth design and smooth engagement help in reducing the impact of gear meshing on overall noise levels.
- Applications: Helical gearboxes are commonly used in applications that require higher torque and smoother operation, such as heavy machinery, automotive transmissions, and industrial equipment. Spur gearboxes are suitable for applications with moderate loads and where noise considerations are not critical.
Overall, helical gearboxes offer advantages in terms of efficiency, load distribution, and noise reduction compared to spur gearboxes. However, the choice between the two depends on specific application requirements and factors such as torque, speed, space constraints, and noise considerations.
editor by CX 2023-08-16
China manufacturer CZPT 173/200/225/250/280/315/330/375 Rubber Plastic Machine Helical Gear Reducer CZPT Extruder Gearboxes Factory Price wholesaler
Product Description
Product Description
ZLYJ gearbox series are transmission devices, which are specially designed for single-screw extruder with high precision, hard gear surface, accompany with thrust. Adopting the technical specifications stipulated in JB/T9050. 1-1999, all CZPT gearboxes are designed accordingly.
Product Parameters
Detailed Photos
Machine Parts
Name: High Quality CZPT Gearbox
Original: China Gear material: high alloy steel low carbon (20CrMnTi)The interface is hardened, precision-ground and hard-chrome-plated to 870HV hardness and Ra 0.8-1.6µm roughness, so the shaft-seal is super hard, resists wear and corrosion, and very durable.
Main Features
Made of carburizing steel (Forging), go through normalization heat treatment for forged carburizing steel; and gear faces are also nitride-treated to at least 60HRC hardness for optimal rigidity and carburizing depth 0.8-1.1MM and wear resistance.
Single Screw Extruder Gearbox
Our CZPT gearbox for single screw extruder adopts high strength alloy steel material and the gear is of high accuracy. It is less
noisy, work quietly and smoothly. So it is a longer service life.
Gearbox casting body
1. we prepare enough casting body in our workshop to guarantee the delivery time.
2. this is our new gearbox casting body design.
3. fast delivery time and high quality
Heat treatment furnace
We have own heat treatment for the gears and gearshaft, so it’s easy for us to control the quality and the quality is more gurantee.
Packaging & Shipping
1)Packing: Wrapped up by film in wooden cases
2)Port Departure: HangZhou Port
3)Delivery time: 25 working days CZPT receipt of 30% deposit(days based on your quantity)
We use strong plywood or wooden case for all our products.
FAQ
Q1. Are you a trading company or a manufacturer?
We are a BSCI&ISO-9001 certificated manufacturer.
Q2. Can I place the customized order for different sizes, colors, materials,packings….?
Yes, all the customized orders are welcomed.
Q3. Could I get a QC report before delivery?
Yes, the specific QC reports will be sent to you before delivery.
Q4. Can I get a lower price if I place a larger order?
Yes, the price will be modified according to your order quantities.
| After-sales Service: | Good After-Sales Service |
|---|---|
| Warranty: | One Year |
| Standard: | DIN, ASTM |
| Technics: | Casting |
| Feature: | Corrosion Resistance |
| Material: | Metal |
| Customization: |
Available
| Customized Request |
|---|
Helical Gearbox
Using a helical gearbox can greatly improve the accuracy of a machine and reduce the effects of vibration and shaft axis impact. A gearbox is a circular machine part that has teeth that mesh with other teeth. The teeth are cut or inserted and are designed to transmit speed and torque.
Sliding
Among the many types of gearboxes, the helical gearbox is the most commonly used gearbox. This is because the helical gearbox has a sliding contact. The contact between two gear teeth begins at the beginning of one tooth and progresses to line contact as the gear rotates.
Helical gears are cylindrical gears with teeth cut at an angle to the axis. This angle enables helical gears to capture the velocity reversal at the pitch line due to the sliding friction. This leads to a much smoother motion and less wear. Moreover, the helical gearbox is more durable and quieter than other gearboxes.
Helical gears are divided into two categories. The first group comprises of crossed-axis helical gears, commonly used in automobile engine distributor/oil pump shafts. The second group comprises of zero-helix-angle gears, which do not produce axial forces. However, they do create heat, which causes loss of efficiency.
The helical gearbox configuration is often confounded, which results in higher working costs. In addition, the helical gearbox configuration does not have the same torque/$ ratio as zero-helix angle planetary gears.
When designing gears, it is important to consider the effects of gear sliding. Sliding can lead to friction, which can cause loss of power transmission. It also leads to uneven load distribution, which decreases the loadability of the helical planetary gearbox.
In addition, the mesh stiffness of helical gears is commonly ignored by researchers. An analytical model for the mesh stiffness of helical gears has been proposed.
Axial thrust forces
Several options are available for axial thrust forces in helical gearboxes. The most obvious is to use a double helical gear to offset the force component. Another option is to use a thrust bearing with a lower load carrying capacity. This becomes a sacrificial component.
In order to transmit a force, it must be distributed along the contact line. This force is the sum of tangential, radial and axial force components. All these components must be transferred from the source to the output. This is a complex process that involves the use of gears.
The axial force component must be transferred through the gears. The resultant force is then divided into orthogonal components and divided into the thrust directions. The radial force component is from the contact point to the driven gear center.
The axial force component is also determined by the size of the gear’s pitch diameter. A larger pitch diameter results in a greater bearing moment. Similarly, a larger gear ratio will produce a higher torque transmission.
It should be noted that the axial force component is only a small part of the total force. The normal force is distributed along the contact line.
The double helical gear is also not a perfect duplicate of the herringbone gear. It has two equal halves. It is used interchangeably with the herringbone gear. It also has the same helix angle.
Reduced impact on the shaft axis
Increasing the helix angle of a gear pair will reduce resonance effects on the shaft axis of a helical gearbox. However, this will not reduce the overall vibration in the gearbox. In fact, it will increase the vibration. This can lead to serious fatigue faults in the drive train.
This is because the helix angle has an effect on the contact line between two teeth. As the helix angle increases, the length of the contact line decreases. In addition, it has an effect on the normal force and curvature radii of the teeth. The pressure angle also affects the curvature radii.
Helical gears have several advantages over spur gears. These advantages include: lower vibration, NVH (noise, vibration and harshness) characteristics, and smooth operation under heavy loads. They also have better torque capability. However, they produce higher friction. They also require unique approaches to control their thrust forces.
The first step in reducing resonance effects is to regulate the meshing frequency of the helical gear stage. This can be done by varying the shift factors in the gear. If the shift factors are too large, then the gear will experience resonance effects. The helix angle is also affected by the gear’s shift factors. It is therefore important to control the gear’s geometry in order to reduce the resonance effects.
Next, the effects of the web structure and rim thickness on the root stress of the gear are examined. These are measured by strain gage. The results indicate that the maximum root stress is obtained when the worst meshing position is reached.
Quieter operation
Compared to spur gears, helical gears are much quieter in operation. This is due to their larger teeth. Aside from this, they have a higher load-carrying capacity. They also run smoother and have a higher speed capability. Helical gears are also a good substitute for spur gears.
The most significant parameter relating to noise reduction is the gear contact ratio. It ranges from below 1 to more than 10 and is determined by the number of teeth intersecting a parallel shaft line at the pith circle. It is also a good indicator of the level of noise reduction that helical gears provide.
In addition, helical gears have a lower impulse flexure than spur gears. This is because the contact point slides along the helical surface of each tooth. This also adds internal damping to the gear system.
While helical gears are less noisy than spur gears, they do have a high level of wear and tear. This can affect the performance of the gear. However, it is possible to improve the smoothness of the tooth surface by grinding. In addition, running the gears in oil can also help improve the smoothness of the tooth surface.
There are many industries that use helical gears. For example, the automotive industry uses them in their transmissions. They also are used in the agricultural industry. They are often used in heavy trucks.
Helical gears are also known to generate less heat and are quieter than other gears. They can also deliver parallel power transfers between parallel or non-parallel shafts.
Improved accuracy
Increasing the accuracy of a helical gearbox is the key to its operation and reliability. The accuracy of the gearbox is dependent on several features. Among the most important are the profile and lead. Moreover, the power requirements of a gear drive should be taken into consideration.
The profile is the most sensitive feature of a helical gear. If the profile is not symmetric, the gear will run with a noisy spur gear. In addition, the profile is also the most sensitive to lead.
A helical gearbox plays a key role in the power transmission of industrial applications. However, the heavy duty operating conditions make it susceptible to a variety of faults.
A helical gearbox’s performance depends on the accuracy of the individual gears. This is accomplished by minimizing the backlash. A common way to reduce backlash is to approach all target positions from a common direction. This approach also reduces transmission noise.
The accuracy of a helical gearbox can be improved by using a flexible electronic gearbox. This can reduce the degree of twist. Moreover, it can increase the accuracy of gear machining.
A helical gearbox with an electronic gearbox can increase the accuracy of twist compensation. It can also improve the linkage between B-axis, C-axis, and Z-axis. Moreover, the electronic gearbox will ensure the linkage relationship between Y-axis, Z-axis, and C-axis.
The accuracy of a helical Gearbox can be improved by calculating the position error of the gear train. Pitch deviation and helix angle deviation are two types of position error.
Reduced vibration
Using helical gearboxes can reduce vibration and noise. These gears are used in a variety of applications, including automotive transmissions. Moreover, these gears are quiet enough to operate in noise-sensitive applications.
Using CZPT software, three different gearbox housing designs are compared. The external dimensions and mass of each design are kept constant, but different quantities of longitudinal and transverse stiffeners are employed. The resulting models are then compared to experimental results. In addition, the free vibration response of these models is analyzed. The results are shown in Fig. 5.
In terms of noise reduction, the cellular model produces the lowest sound pressure level. However, the cross model produces the higher sound level. The cellular model also produces better peak to peak results.
The input-stage gear pair is the power source of the output-stage gear pair. The output-stage gear pair’s vibration is also studied. This includes a phase diagram and a frequency-domain diagram. The influence of the driving torque and the pinion’s velocity on the vibration is studied in a numerical manner. The time evolution of the normal force and the lubricant stiffness is also studied.
The input-stage pinion modification reduces the input-stage gear pair’s vibration. This reduction is achieved by adding dual bearing support to the input shaft.
editor by CX 2023-04-26
China Gearbox for Plastic Extruding, Helical Gear Reducer helical gearbox advantages
Item Description
About us :
ZHangZhoug pinbo plastic machinery co.,ltd is located in HangZhou HangZhou city with brand of PYM(Former HangZhou yumin machine screw co.ltd since 1988). The company is specialized in making screw barrel, gearbox zlyj series, t die, filter and extruder machine. It has become one of the largest supplier of main parts in HangZhou city which is the basement of plastic machines.
Crucial terms: Gearbox, CZPT collection, speed reducer, extruder gearbox, plastic gearbox, plastic extruder gearbox, plastic extrusion machine gearbox, difficult tooth gearbox, gearbox for plastic extruder, gearbox for plastic extrusion machine, plastic extruder device, plastic extrusion equipment, plastic extruder, plastic wire drawing equipment, plastic tape drawing machine
Short introduce
Series CZPT decelerator is a travel with high-precision and difficult tooth surface and thrust bearing created to match with screw extruder. It is designed according to the specification in code ZBJ19009-88, highlighted with high-energy alloy steels for CZPT and shaft areas. The equipment is dealt with with carburation, quenching and equipment grinding. Gear wheel precision is GB10095-88, course 6. Tooth surface area hardness is HRC54-sixty two. A thrust bearing with in excess of-specificaiton is mounted on the front end of the hollow output shaft to have back backblow of screw. Domesic quality goods are selected for the normal areas this sort of as bearing and oil seal that could also use inported items as needed by buyer. The entire device is compact, has large have potential, supply steady generate with low noise and higher performance. The overall performance of this items is up to the sophisticated degree and a very good substitute for imported products of the identical kind.
ZLYJ series 133, 146, 173, 200, 225, 250, 280, 315, 330 are accessible.
Why choose us?
A> lengthy time encounter and history
B> lengthy time nitriding therapy and heating treatment method by alone
C>advanced Fanuk sequence CNC personal computer-controlled milling machines
D>depth hole drilling equipment in 8meters length, which ensure the straigtnss of barrel within.
E> CAD drawing confirmation before start off creating
F> Prompt soon after sale support
G>Land owner and registration funds twenty five, 000, 000RMB
Packaging&delivery
Packing: Wrapped up by movie in wooden cases
Port Departure: HangZhou / ZheJiang Port
Delivery time: 25 doing work days soon after order verify for item
Payment: L/C, T/T, Western Union, Funds Gram
If there is any difficulty, you can get in touch with with us at any time, we will reply you as soon as achievable!
|
/ Piece | |
1 Piece (Min. Order) |
###
| Warranty: | 1 Year |
|---|---|
| Plastic Processed: | ABS |
| Product Type: | Extrusion Molding Machine |
| Screw: | Single-Screw |
| Screw Channel Structure: | Deep Screw |
| Exhaust: | Exhaust |
###
| Customization: |
|---|
|
/ Piece | |
1 Piece (Min. Order) |
###
| Warranty: | 1 Year |
|---|---|
| Plastic Processed: | ABS |
| Product Type: | Extrusion Molding Machine |
| Screw: | Single-Screw |
| Screw Channel Structure: | Deep Screw |
| Exhaust: | Exhaust |
###
| Customization: |
|---|
Helical Gearbox
Depending on the helical gearbox, it can be either Crossed-axis or Inline. Basically, helical gearboxes are composed of a set of toothed gears that mesh with other toothed parts to transmit torque and speed to other parts of the machine.
Right angle helical gearboxes
Choosing the right angle gearbox can be difficult. This is because the design and specifications will depend on the type of application. The right gearbox can make or break the efficiency of the system. For example, a right angle gearbox will need to be corrosion resistant if it is used in a washdown application. It may also require special grease for use in cold temperatures.
There are many different types of right angle gearboxes. The types include worm, hypoid, and spiral bevel gearboxes. The most common are worm gearboxes. These are a great option for applications that need high torque and power. However, they are not as efficient as spur gears.
Helical gearboxes are ideal for heavy-duty industrial applications such as conveyors, blowers, and elevators. They are quiet and have better speed capabilities than spur gears. They can handle larger loads because of their gradual engagement. They are also capable of adjusting the rotation angle by 90 degrees. They are also more efficient at high speeds.
Spiral bevel gearboxes require more precision to manufacture. They are also more expensive to produce. This is because the teeth need to be drilled and shaped to fit the shafts. The gearbox needs to be designed with tight tolerances and requires basic lubrication. Its operating cycle is long.
Helical gearboxes can be used in conjunction with other gearboxes. For example, the output shaft may be a hollow shaft, or it may be designed with dual counter-rotating shafts. They can also be designed to operate in either a clockwise or counter-clockwise direction.
Right angle gearboxes are ideal for high-speed applications. They require less maintenance than other industrial components. They may require corrosion resistant plating or stainless steel shafts. If you are considering a right angle gearbox, check with a distributor to see what types of products are available. A representative will be able to help you with installation. They may also offer custom gearbox solutions to fit your needs.
A gearbox is made up of four main components. These components include the input shaft, the output shaft, the gear, and the backlash.
Crossed-axis helical gears
Normally, helical gearboxes are used to increase torque between two rotating shafts. Compared to other types of gearboxes, helical gearboxes offer greater speed and power carrying capacity. They are also quieter and smoother in operation. These gearboxes are used in many industries such as food processing, plastic, rubber, and oil industries. These gears also have the advantage of being cheaper than spur gears.
These gears are designed with special teeth that are positioned at an angle to the face of the gear. As they rotate, the teeth engage gradually. They have longer teeth, which allow them to carry heavy loads. The contact area also increases as the gears rotate.
A cross axis helical gearbox is one of the most common types of gearboxes. This gearbox has an advantage over spur gears, since it uses bearings to support the thrust load. It can also adjust the rotation angle by 90 degrees. These gearboxes are typically used to drive automobile oil pump/distribution shafts. They are also used to drive blowers. They have a large thrust force.
The cross axis helical gearbox has the advantage of using bearings to support the thrust load. However, it also has the disadvantage of using a large amount of bearings. In addition, these gears are not suitable for speed reduction beyond 1:2.
Thermoplastic crossed axis helical gears are a convenient solution for high volume applications. These gears are self-locking and offer high torque. These gears are also very durable. They are also available in a variety of configurations and sizes. They are used in a wide range of industries, including the textile industry. The output torque of these gears is also very high.
Crossed helical gears are also used to transmit motion and power between perpendicular but non-intersecting shafts. To achieve this, two mating helical gears must have the same helix angle, pressure angle, and normal pitch. They should also be mounted on perpendicular but non-intersecting, parallel shafts.
To calculate the real radial pitch of a gear, the angle of cut is measured. The gear teeth are then cut at an angle to the face of the gear. The helix angle is also measured.
Inline helical gears
Unlike spur gears, helical gears have a large surface contact and are characterized by low noise and large torque. Moreover, helical gears also have a high degree of meshing performance. They are also compact and durable.
As the name suggests, helical gears are produced using hard steel teeth. They are also hobbed to ensure smooth running and accurate surface finish. In addition, all gearing is ground for increased efficiency.
Inline helical gearboxes are used in a number of applications, including waste water systems and in solvent extraction. They are also used in industries like power plants and food & tobacco. They have good efficiency and are low in cost. They also have interchangeability and high durability. They can be installed in a single piece aluminum alloy housing. They can also be foot mounted or flange mounted. They are available in single stage and three stage constructions.
Helical gearboxes are typically used in high-load applications, such as in cement and waste water systems. They are also suitable for industrial applications, including in manufacturing. They are also used in applications where there is a large speed variation range. They are suitable for a wide temperature range, from -10 degC to 40 degC.
A helical gearbox has a high degree of interchangeability, and can be installed with a wide range of motors. They are also available in flame proof versions. They can also be supplied with an integrated output flange. They have standard IEC inputs, making them easy to install and operate. They also have a removable inspection cover, which allows periodic inspection of gearing. They can also be supplied with integral mounting bases.
The transmission ratio of helical gearboxes is finely graded to meet different working conditions. They also have an output torque that ranges from 1.4-250. They are also available in a modular model, which allows them to be produced in an economical manner. They can also be installed with a standard IEC input, which makes them easy to fit with any IEC motor. They also have a permanent nameplate, which indicates the ratio and the output torque.
Helix angle
Using a helical gearbox is a more economical and efficient way of creating a gearbox. It is also beneficial for production because it allows for more interchangeable components. It can also be used in the oil and plastic industries. It has advantages over conventional gears because it runs quieter.
The helical gearbox is a type of gearbox that uses a helical cut on the teeth of the gears. It carries more surface contact than conventional gears, which increases the power carrying capacity. It is also more durable and quieter than conventional gears.
The helical gearbox is generally used in enclosed gear systems because it allows for higher tooth overlap and smoother performance. It also eliminates thrust forces. The helical gearbox can be made of two helical sections that are close together. It is common to use double helical gearboxes in enclosed gear systems. The gears can be ground and hardened.
The radial pitch of helical gears is about eight millimeters. In the helical gearbox, the radial pitch of the gears is the same as the pitch of the spur gears. Using the same tooth cutting tools, it is possible to make helical gears more economically.
The pitch of the helical gearbox will vary with the helix angle. Typically, the helix angle is between 15 and 30 degrees. The pitch will also change with the number of teeth in the spur gear. The pitch will increase when the number of teeth increases.
The pitch is also affected by the pressure angle of the tooth. The pressure angle affects the normal force and curvature radii. The length of the helical gear contact line decreases as the pressure angle increases. This can also be seen when considering contact on the tooth surface. The helix angle is also important when calculating the forces between the helical gears.
It is important to understand that helical gears generate axial forces within the gear-mesh. These forces need to be supported by bearings. They also generate heat. This heat is also detrimental to the efficiency of the gear. It can also cause power loss.
editor by CX 2023-03-29
China Gearbox Zlyj Series 133 146 173 180 200 225 250 315 Helical Gearbox for Extruder Zlyj Plastic Speed Reducer Extruder Gearbox cast iron helical gearbox
Product Description
Goods Description
Introduction:
Power range:5.5-200KW
Transmission ration range:8-35
Output torque(Kn.m):best to 42
Benefits:
Highly Standard Modular Designed
Top quality materials guarantees the item dependability
High Toughness,Compact Dimension
Prolonged Provider Lifestyle
Lower Noise
High Performance
Big radial loading capability
Axial load potential of up to 5% of radial load
Technical Parameters
Packing and transport
Our certification
Consumer pay a visit to
Firm Profile
HangZhou HangZhoun Equipment Co., Ltd. is a expert equipment producing company, with 20 several years of experience in the area of equipment manufacturing and the ability of unbiased study and advancement. Our goods count on superior technologies, reliable top quality, superb costs to earn the believe in of customers. The products are bought to more than fifty international locations all in excess of the world, and have a great cooperative romantic relationship with consumers. Our items enjoy a a single-12 months guarantee provider for key parts, and our 24-hour technical crew offers customer support.
| Application: | Machinery |
|---|---|
| Function: | Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Cycloidal |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
###
| Customization: |
|---|
| Application: | Machinery |
|---|---|
| Function: | Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Cycloidal |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
###
| Customization: |
|---|
Helical Gearbox
Generally, a helical gearbox consists of two gears. The two gears have cut teeth and are inserted into one another. These two gears work together to transmit torque and speed. This type of gearbox is used in a wide variety of applications.
Working principle
Besides being cheaper to make, helical gears have several advantages over straight-cut spur gears. Firstly, they offer a smoother operation, less vibration, and lower noise levels. They also transmit larger loads than spur gears. These gears are used in a variety of industries, such as food processing, plastic industries, and oil industries.
Another important feature of helical gears is the smooth and gradual engagement of teeth. This helps them function more smoothly, especially when working under heavy loads. This process reduces shock and backlash, and also reduces wear.
In addition to this, the helix angle is a variable that can be adjusted to suit the application. The angle is usually either left or right, and can vary based on the view.
Helical gears are usually used in enclosed gear drives, such as conveyors, blowers, and elevators. They offer a smoother operation, which makes them ideal for applications that require quiet operation. However, helical gears are less efficient at transmitting power than spur gears.
The relative contact stress (RCS) calculated for a helical gear is similar to that of a spur gear. However, the volume Vi, which is a helix-dependent quantity, is different. This volume is defined as the total volume of the helical pocket, calculated by integrating along the face width. The volume of a generic pocket is larger than that of a helical pocket without a helix.
In addition, the contact ratio is reduced. This is due to the fact that two teeth are not parallel to each other. A thick oil film prevents the teeth from making contact. This film also cools the gear tooth surfaces.
The service factor is a number that takes into account the conditions under which a gear is used. It is usually a ratio between the maximum torque and the torque produced.
Efficiency
During a recent gearbox measurement campaign, 13 commercial gearboxes were extensively tested. Efficiency was measured at nominal torque and power. The resulting efficiency maps presented in this paper show that the efficiency of each gearbox is fairly similar.
The efficiency of a gearbox depends on the gears’ teeth and the ratio between them. The lower the ratio, the higher the efficiency.
Efficiency is also affected by the load torque. The higher the load torque, the lower the efficiency. This is especially true for gearboxes with high ratios.
The power loss is also affected by the contact and overlap ratios. For gearboxes with high ratios, the difference between the efficiency of the catalog and model-based efficiency is greater than for low-ratio gearboxes. Fortunately, improvements in lubrication are closing this gap.
The helical gearbox is the most effective gearbox in the industry. It transfers motion between parallel configurations and has less noise than spur gears. These gears engage gently and smoothly, so they are less prone to wear and tear. They also allow for greater power carrying capacity.
Although helical gears are effective, they are more expensive than traditional gears. However, the cost savings can be significant over time. It is important to consider the advantages of a helical gearbox before choosing a gearbox for your application.
When comparing the efficiency of a helical gearbox to that of a worm gearbox, the worm gearbox is more efficient. However, the difference in efficiency is not as great as many other gearboxes.
The efficiency of a helical gearbox is also affected by the speed of the gears. The gearbox must have adequate lubrication for bearings. It is also important to consider the space requirements in the drive line.
Applications
helical gearbox applications are widespread and they are used in many industries. Some of the applications include the printing industry, the rubber industry, the plastics industry, the cement industry, the earth-moving industry, and the chemical industry.
helical gearboxes are also used for conveyors and elevators. They are very durable and they can carry larger loads. They are also quieter than straight cuts. They are also used in many automotive transmissions.
helical gearboxes transmit power between two parallel shafts. They are a good substitute for spur gears. They are compact and they reduce vibration and noise. They are also very durable and they can work in non-parallel shafts.
The most common application is in the automotive industry. Helical gearboxes are also used in other industries. They are very useful in elevators, conveyors, and other heavy industrial settings. They also provide a high level of speed reduction and they are commonly used in automation control systems. They are also used in the mining industry and the cement industry.
helical gearboxes can be fabricated with various modifications. This is important because some industries may require different gearboxes.
Helical gears have a higher number of teeth. This leads to less wear and tear. They are also less noisy than spur gears. Their ability to generate a large thrust force is what makes them ideal for high-speed applications. They are also able to distribute load among several axes. They are also used in high shock and vibration applications.
helical gearboxes work at a higher efficiency than spur gears. However, the manufacturing costs for helical gears are greater than for spur gears.
helical gearboxes also have the advantage of transferring power between right-angle shafts. They can work in conjunction with crossed axis gears, which eliminate shock loading.
Variations
Several variations of helical gearbox are available in the market for different industries. They are widely used in automobile transmissions and other industries. They are quieter than spur gears. They are also durable and are highly efficient. However, they can cause higher friction and wear.
Helical gears are made of teeth that twist around a cylindrical gear body at an angle. The angle at which the gear teeth are cut is called the helix angle. The helix angle can be adjusted to fit the gear and its surroundings.
The helix angle also determines how much axial force the gear produces. A larger helix angle will generate more axial force. This increase in axial force must be absorbed by the bearings. The pressure angle also has a direct impact on the normal force and curvature radii of the tooth.
Helical gears can be mounted in parallel or crossed configuration. Helical gears connected in parallel require the same pitch and pressure angle to work correctly. Helical gears connected in crossed configuration can operate more quietly and smoothly than spur gears. However, they can also be used to transmit higher torques.
Helical gears are also available in single and double helical designs. Single helical gears are produced with the same tools and equipment as spur gears. Unlike spur gears, single helical gears have more surface contact. They are also better for precision drives.
Double helical gears are also called herringbone gears. They are produced by cutting a groove between two teeth. They can eliminate axial forces and are also used to provide high load carrying capacity.
Helical gears are commonly used for low power transmission applications. They also provide an alternative for connecting parallel and non-parallel shafts. They are also used in high speed applications.
Tool tip radius
Among the many parameters that are used in a helical gearbox design, the tooth tip radius is probably the most important, albeit only because it is one of the least intuitive. The best way to estimate the diameter of a helical gear tooth is to use a tooth reference profile as the basis for the calculation. A similar procedure is used to calculate the helix angle. A tool tip that is too small will result in a tooth that undercuts, which is a problem if you have a gear that has a high number of teeth and you want to reduce the chance of tooth failure.
For the gear buffs, there are many helical gearbox tools and processes, the tip diameter being but one of them. Luckily for gear design geeks, there is a lot more to the helical gearbox than meets the eye. For example, a helical gear tooth is a three-dimensional surface, so its shape and function can be computed mathematically or numerically.
In addition to a tooth tip that flies by the seat of your pants, the helical gearbox is also the product of a manufacturing process. The main culprit is the profile shift, which is the distance between the gear pitch diameter and the datum line of the cutting tool. While a gear designer could choose to ignore this issue, it is often a design consideration for the benefit of maximizing contact ratios. This means that the gear teeth must be able to withstand the torque of their respective gear trains.
A helical gear is a geometric package, and the best way to package the gears is to minimize tooth bending strength while maximizing tooth bending stiffness. To do this, you must limit the thickness of your tooth tip. This is usually accomplished with a tooth profile that is shaped to match the tooth contour of the gear it is intended to replace.
editor by CX 2023-03-27
China Zlyj 173/180/200/225/250/280/375 Helical Gear Speed Reducer Soap Extruder Gearboxes for Plastic Extrusion Machine Factory Price bevel helical gearbox assembly
Solution Description
Item Description
ZLYJ gearbox series are transmission units, which are specifically designed for solitary-screw extruder with large precision, challenging gear surface area, accompany with thrust. Adopting the technical specifications stipulated in JB/T9050. 1-1999, all CZPT gearboxes are designed appropriately.
Solution Parameters
Thorough Pictures
Device Parts
Identify: Higher Quality CZPT Gearbox
First: China Gear material: high alloy metal low carbon (20CrMnTi)The interface is hardened, precision-floor and challenging-chrome-plated to 870HV hardness and Ra .8-1.6µm roughness, so the shaft-seal is super hard, resists put on and corrosion, and quite tough.
Principal Features
Manufactured of carburizing metal (Forging), go by way of normalization warmth remedy for solid carburizing steel and equipment faces are also nitride-handled to at the very least 60HRC hardness for best rigidity and carburizing depth .8-1.1MM and use resistance.
Solitary Screw Extruder Gearbox
Our CZPT gearbox for solitary screw extruder adopts large power alloy steel material and the gear is of high accuracy. It is much less
noisy, perform quietly and effortlessly. So it is a more time provider existence.
Gearbox casting physique
one. we get ready ample casting body in our workshop to ensure the supply time.
two. this is our new gearbox casting physique design.
3. rapidly shipping and delivery time and higher quality
Heat remedy furnace
We have own warmth therapy for the gears and gearshaft, so it’s effortless for us to manage the top quality and the quality is much more gurantee.
Packaging & Delivery
1)Packing: Wrapped up by movie in picket cases
2)Port Departure: HangZhou Port
three)Delivery time: 25 working times upon receipt of 30% deposit(days based on your quantity)
We use sturdy plywood or picket circumstance for all our goods.
FAQ
Q1. Are you a investing firm or a producer?
We are a BSCI&ISO-9001 certificated maker.
Q2. Can I area the tailored order for various sizes, colours, materials,packings….?
Yes, all the personalized orders are welcomed.
Q3. Could I get a QC report prior to shipping?
Indeed, the distinct QC reports will be despatched to you prior to delivery.
This fall. Can I get a lower price if I spot a more substantial get?
Of course, the value will be modified in accordance to your get portions.
| To Be Negotiated | 1 Piece (Min. Order) |
###
| After-sales Service: | Good After-Sales Service |
|---|---|
| Warranty: | One Year |
| Standard: | DIN, ASTM |
| Technics: | Casting |
| Feature: | Corrosion Resistance |
| Material: | Metal |
###
| Customization: |
Available
|
|---|
| To Be Negotiated | 1 Piece (Min. Order) |
###
| After-sales Service: | Good After-Sales Service |
|---|---|
| Warranty: | One Year |
| Standard: | DIN, ASTM |
| Technics: | Casting |
| Feature: | Corrosion Resistance |
| Material: | Metal |
###
| Customization: |
Available
|
|---|
Helical Gearbox
Depending on the helical gearbox, it can be either Crossed-axis or Inline. Basically, helical gearboxes are composed of a set of toothed gears that mesh with other toothed parts to transmit torque and speed to other parts of the machine.
Right angle helical gearboxes
Choosing the right angle gearbox can be difficult. This is because the design and specifications will depend on the type of application. The right gearbox can make or break the efficiency of the system. For example, a right angle gearbox will need to be corrosion resistant if it is used in a washdown application. It may also require special grease for use in cold temperatures.
There are many different types of right angle gearboxes. The types include worm, hypoid, and spiral bevel gearboxes. The most common are worm gearboxes. These are a great option for applications that need high torque and power. However, they are not as efficient as spur gears.
Helical gearboxes are ideal for heavy-duty industrial applications such as conveyors, blowers, and elevators. They are quiet and have better speed capabilities than spur gears. They can handle larger loads because of their gradual engagement. They are also capable of adjusting the rotation angle by 90 degrees. They are also more efficient at high speeds.
Spiral bevel gearboxes require more precision to manufacture. They are also more expensive to produce. This is because the teeth need to be drilled and shaped to fit the shafts. The gearbox needs to be designed with tight tolerances and requires basic lubrication. Its operating cycle is long.
Helical gearboxes can be used in conjunction with other gearboxes. For example, the output shaft may be a hollow shaft, or it may be designed with dual counter-rotating shafts. They can also be designed to operate in either a clockwise or counter-clockwise direction.
Right angle gearboxes are ideal for high-speed applications. They require less maintenance than other industrial components. They may require corrosion resistant plating or stainless steel shafts. If you are considering a right angle gearbox, check with a distributor to see what types of products are available. A representative will be able to help you with installation. They may also offer custom gearbox solutions to fit your needs.
A gearbox is made up of four main components. These components include the input shaft, the output shaft, the gear, and the backlash.
Crossed-axis helical gears
Normally, helical gearboxes are used to increase torque between two rotating shafts. Compared to other types of gearboxes, helical gearboxes offer greater speed and power carrying capacity. They are also quieter and smoother in operation. These gearboxes are used in many industries such as food processing, plastic, rubber, and oil industries. These gears also have the advantage of being cheaper than spur gears.
These gears are designed with special teeth that are positioned at an angle to the face of the gear. As they rotate, the teeth engage gradually. They have longer teeth, which allow them to carry heavy loads. The contact area also increases as the gears rotate.
A cross axis helical gearbox is one of the most common types of gearboxes. This gearbox has an advantage over spur gears, since it uses bearings to support the thrust load. It can also adjust the rotation angle by 90 degrees. These gearboxes are typically used to drive automobile oil pump/distribution shafts. They are also used to drive blowers. They have a large thrust force.
The cross axis helical gearbox has the advantage of using bearings to support the thrust load. However, it also has the disadvantage of using a large amount of bearings. In addition, these gears are not suitable for speed reduction beyond 1:2.
Thermoplastic crossed axis helical gears are a convenient solution for high volume applications. These gears are self-locking and offer high torque. These gears are also very durable. They are also available in a variety of configurations and sizes. They are used in a wide range of industries, including the textile industry. The output torque of these gears is also very high.
Crossed helical gears are also used to transmit motion and power between perpendicular but non-intersecting shafts. To achieve this, two mating helical gears must have the same helix angle, pressure angle, and normal pitch. They should also be mounted on perpendicular but non-intersecting, parallel shafts.
To calculate the real radial pitch of a gear, the angle of cut is measured. The gear teeth are then cut at an angle to the face of the gear. The helix angle is also measured.
Inline helical gears
Unlike spur gears, helical gears have a large surface contact and are characterized by low noise and large torque. Moreover, helical gears also have a high degree of meshing performance. They are also compact and durable.
As the name suggests, helical gears are produced using hard steel teeth. They are also hobbed to ensure smooth running and accurate surface finish. In addition, all gearing is ground for increased efficiency.
Inline helical gearboxes are used in a number of applications, including waste water systems and in solvent extraction. They are also used in industries like power plants and food & tobacco. They have good efficiency and are low in cost. They also have interchangeability and high durability. They can be installed in a single piece aluminum alloy housing. They can also be foot mounted or flange mounted. They are available in single stage and three stage constructions.
Helical gearboxes are typically used in high-load applications, such as in cement and waste water systems. They are also suitable for industrial applications, including in manufacturing. They are also used in applications where there is a large speed variation range. They are suitable for a wide temperature range, from -10 degC to 40 degC.
A helical gearbox has a high degree of interchangeability, and can be installed with a wide range of motors. They are also available in flame proof versions. They can also be supplied with an integrated output flange. They have standard IEC inputs, making them easy to install and operate. They also have a removable inspection cover, which allows periodic inspection of gearing. They can also be supplied with integral mounting bases.
The transmission ratio of helical gearboxes is finely graded to meet different working conditions. They also have an output torque that ranges from 1.4-250. They are also available in a modular model, which allows them to be produced in an economical manner. They can also be installed with a standard IEC input, which makes them easy to fit with any IEC motor. They also have a permanent nameplate, which indicates the ratio and the output torque.
Helix angle
Using a helical gearbox is a more economical and efficient way of creating a gearbox. It is also beneficial for production because it allows for more interchangeable components. It can also be used in the oil and plastic industries. It has advantages over conventional gears because it runs quieter.
The helical gearbox is a type of gearbox that uses a helical cut on the teeth of the gears. It carries more surface contact than conventional gears, which increases the power carrying capacity. It is also more durable and quieter than conventional gears.
The helical gearbox is generally used in enclosed gear systems because it allows for higher tooth overlap and smoother performance. It also eliminates thrust forces. The helical gearbox can be made of two helical sections that are close together. It is common to use double helical gearboxes in enclosed gear systems. The gears can be ground and hardened.
The radial pitch of helical gears is about eight millimeters. In the helical gearbox, the radial pitch of the gears is the same as the pitch of the spur gears. Using the same tooth cutting tools, it is possible to make helical gears more economically.
The pitch of the helical gearbox will vary with the helix angle. Typically, the helix angle is between 15 and 30 degrees. The pitch will also change with the number of teeth in the spur gear. The pitch will increase when the number of teeth increases.
The pitch is also affected by the pressure angle of the tooth. The pressure angle affects the normal force and curvature radii. The length of the helical gear contact line decreases as the pressure angle increases. This can also be seen when considering contact on the tooth surface. The helix angle is also important when calculating the forces between the helical gears.
It is important to understand that helical gears generate axial forces within the gear-mesh. These forces need to be supported by bearings. They also generate heat. This heat is also detrimental to the efficiency of the gear. It can also cause power loss.
editor by czh 2023-01-08
China Best Sales CZPT 10mm plastic planetary mini reducer conveyor motor gearbox mini 400rpm gear motor with Good quality
Warranty: Other
Model Number: 10mm gear motor
Usage: BOAT, Car, Electric Bicycle, FAN, Home Appliance, Cosmetic instrument, SMART HOME
Type: Micro Motor
Torque: custom
Construction: Series Wound
Commutation: Brushless
Protect Feature: Totally Enclosed
Speed(RPM): custom
Continuous Current(A): custom
Efficiency: IE 2
Use voltage range: 0.5-9V
Rated Votage: 3.0V
Gearbox & Motor Dia: 10mm & 10mm
Rated Load Current: 215 mA
No Load Current: 80 mA
Rated Torque: 39 gf.cm
Instant Torque: 4,000 gf.cm
Gear Box Length: 15.9mm
Gear Ratio: 16:1
Keywords: OEM Small Gearbox motor
Packaging Details: Standard packaging or accoring to client’s requirement.
Port: HangZhou
provide micro gear gearbox motor drives system custom services.
dc gear motor(size)Rated Voltagespeedload current3.4mm 1.5-5V 3.5-300rpm100mA-220mA4mm 2.4-300rpm 340mA6mm 3 – 12VNo Load Speed: 11-3824 rpm
Rated Load Speed: 10-3229 rpm
No Load Current: 40 mA
Rated Load Current: 100 mA
8mm 14 – XB series industrial planetary reduction gearbox for AC Motor 3111 rpm Gear Stages: 1 – 410mm 3-24 V No Load Speed: 20-4318 rpm
Rated Load Speed: 18-3625 rpm
No-load Current: 60-80 mA12mm 7 – 254 rpm Gear Stages: 1 – 416mm No-load Speed: 4-1,373 rpm
Rated Load Speed: 3-1,125 rpm
No-load Current: 85-110 mA
Rated Load Current: 130-150 mA
20mm No-load Speed: 7-1,636 rpm
Rated Load Speed: 7-1,420 rpm
No-load Current: 70-90 mA
Rated Load Current: 125-130 mA
22mm No-load Speed: 6-1,886 rpm
Rated Load Speed: 5-1, Wholesale Sliding Gate Pulley Heavy Duty Sliding Door Roller Aluminum Door Wheel Stainless Steel Window Roller Factory Price 675 rpm
No-load Current: 100-120 mA
Rated Load Current: 295-300 mA
24mmNo-load Speed: 5-1,460 rpm
Rated Load Speed: 4-1,259 rpm
No-load Current: 70-80 mA
Rated Load Current: 215-220 mA
28mm 5 – 1658 rpm 300mA max
Gear Stages: 1 – 4
32mm 5 – 1348 rpm Gear Stages: 1 – 438mm No-load Speed: 3-1,386 rpm
Rated Load Speed: 3-1,294 rpm
No-load Current: 315-335 mA
Rated Load Current: 1, PTO Shaft Drive Line agriculture parts heavy duty 540 tractor slasher with clutch split wood chipper cardan flange rotovator 679-1,684 mA
Types of Vehicle Gearboxes
In a vehicle, there are many types of gearboxes available. There are planetary gearboxes, Coaxial helical gearboxes, and skew bevel helical gearboxes, among others. In this article, we’ll cover all of them and help you determine which type of gearbox would be right for your vehicle. Also, we’ll discuss how each differs from the others.
planetary gearbox
A planetary gearbox is composed of three main components: a sun gear, an input bevel gear, and an output shaft. A planetary gearbox can have different output torques and ratios. The basic model of a planetary gearbox is highly efficient and transmits 97% of the power input. There are several kinds of planetary gearboxes, depending on the type of operation. In general, there are three types: the simple, the intermediate, and the complex.
The price of a planetary gearbox can vary a lot, and it’s important to know what you’ll need. Different manufacturers produce different planetary gearboxes, so check with a manufacturer to see what they have available. Make sure to check the quality of the planetary gearbox before making a final purchase. In addition, be sure to compare the prices and the availability of a particular product. A quality planetary gearbox will provide years of trouble-free operation and will not break your bank.
Planetary gears feature an integer number of teeth. Each planet has teeth that must mesh with its ring or sun. The number of planets, ring, and tooth count of each gear determine whether the teeth mesh. Some planets have fewer teeth than others, so they mesh better than others. However, compound planets can be more flexible and achieve higher reduction ratios. If you’re looking for a planetary gearbox for your next project, consider getting in touch with a manufacturer who specializes in this technology.
When it comes to construction, a planetary gearbox is no exception. It’s extremely important to choose the right planetary gear for your application, because an imbalance in the planet gear can cause increased wear and failure. Moreover, the compact size of a planetary gear ensures maximum heat dissipation. However, a planetary gear box may require cooling in some applications. A planetary gearbox will make your life easier, and it will give you years of trouble-free operation.
Straight bevel helical gearbox
The Straight bevel helical gearbox has a number of advantages, but it has a relatively short manufacturing process. Its most popular application is in the automotive industry, where it is used in many types of vehicles. Other applications include heavy and light equipment and the aviation and marine industries. Below is a brief introduction to this gearbox type. Read on to learn about its benefits. This type of gearbox is one of the easiest to manufacture.
The spiral bevel gear has larger teeth than straight bevel gears, resulting in a smoother, quieter rotation. It can handle high-speed heavy loads with less vibration. Spiral bevel gears are classified by their tooth form and cutting method. Straight bevel gears are easier to design and manufacture, but spiral bevel gears are more expensive. Both designs are suitable for high-speed, heavy-load operations, and general manufacturing applications.
In addition to being easy to install, the modular bevel gears have many advantages. They have an exceptionally high degree of interchangeability and feature the highest standards of component integrity. They can also be tailored to meet your specific requirements. The advantages of this gearbox type include high precision, optimum performance, and low noise. And because they are modular, they can be produced in a variety of finishes. These include stainless steel, titanium, and bronze.
Straight bevel helical gearbox manufacturers are committed to a high degree of precision in their designs. The radii, torques, and tooth profiles of straight bevel gears are more precisely measured than those of cylindrical bevel gears. The same calculations are used for all traditional bevel gear generators. This ensures that your 5-axis milled bevel gear sets have the same calculations and layout.
Coaxial helical gearbox
The Coaxial helical gearbox is a highly efficient transmission system that is well suited for light-duty applications. Compared to spur-type gearboxes, the real pitch of a Coaxial helical gearbox is low at all helix angles. This is because the coaxial type has the same number of teeth and center gap as the spur gearbox. Coaxial helical gearboxes also have a smaller footprint and are compact.
Several nations have implemented lockdown regulations for Industrial Gearbox trade, threatening the global economy. Several factors have been implicated in COVID-19, including supply chain, market, and financial markets. Experts are monitoring the situation globally and project remunerative prospects for gearbox manufacturers after the crisis. This report depicts the latest scenario and offers a comprehensive analysis of COVID-19’s impact on the entire industry.
This Coaxial helical gearbox features a compact structure and high precision gear. Its three-stage design combines two-stage gears with a single-stage gear, forging high-quality alloy steel for high precision and durability. The gears are serially-designed for easy interchangeability. They are also available in high-frequency heat-treated steel. A Coaxial helical gearbox is the perfect solution for many applications.
Coaxial helical gearboxes have the added benefit of using cylindrical gears instead of shafts. They operate quietly, and have more surface area to interact with. Their fixed angles make them suitable for heavy-duty applications, like in conveyors, coolers, and grinders. Compared to other gearbox types, Helical gearboxes have higher power-carrying capacity. Listed below are the benefits of a Coaxial Helical Gearbox
Skew bevel helical gearbox
A Skew bevel helical gear box is a common type of industrial gearbox. These gearboxes are rigid and compact and can be used in a variety of applications. They are commonly used in heavy-duty applications such as grinding mills, conveyors, and coolers. They are used in many applications to provide rotary motions between non-parallel shafts. They also have the added benefit of high-efficiency in a variety of industries.
Skew bevel helical gear boxes are suitable for heavy loads and are monolithic in construction. This type of gearbox combines the benefits of bevel and helical gears for right-angle torque, which makes it a popular choice for heavy-duty applications. In addition to being a robust and reliable gearbox, these gearboxes are highly customizable and can meet almost any industrial need.
To maximize the efficiency of bevel gears, FE-based tooth contact analysis is used to develop a sophisticated geometry optimization algorithm. The software also allows users to define optimal flank topography by introducing application-specific weightings for specific load levels. With this data, a manufacturing simulation is conducted to determine the best variant. A robust variant combines the benefits of efficiency, load-carrying capacity, and low excitation behavior.
The helical gear can be angled at 90 degrees. This is similar to a spur gear but produces less noise. It can achieve a nine-to-one speed reduction with one stage. However, a helical gear requires a larger driver gear for higher reductions. This gearbox is suitable for speeds from 1:1 to three times. They are often used in the manufacture of motors and generators.
Extruder helical gearbox
An extruder helical gearbox is one of the most common industrial gears. It is compact in size and low-power consuming, making it ideal for heavy-duty applications. Extruder helical gearboxes are suitable for a variety of industrial applications, including cement, plastics, rubber, conveyors, and coolers. In addition to its use in plastics and rubber manufacturing, this gearbox is also useful in other low-power applications such as crushers, coolers, and conveyors.
CZPT SG series Extruder Helical Gearboxes are available in Single Screw and Twin Screw Variations. These gears feature a compact design, high power density, and long service life. Axial bearing housing and thrust bearings are mounted on the input shafts. Extruder helical gearboxes can be installed in various positions, including horizontal, vertical, and inclined.
Helicoidal gears are often produced in a modular manner. This design provides multiple benefits, including engineering and performance advantages, modular production, and the highest level of component integrity. A single helical gearbox can be assembled into a larger gearbox if needed, but modular production ensures consistent performance and economy. This modular design is also cost-effective. It is a versatile and reliable solution for a wide range of applications.
In addition to its efficiencies, Extruder helical gearboxes also have a low noise profile. They have no squeal sounds, and they are silent when running. They can transfer more power than conventional gearboxes. This type of gear has been used in the manufacturing of high-quality plastic products for years. They are often used for applications in automotive transmissions. Aside from being quiet, helical gears have higher contact levels and lower vibration.