Product Description
Coaxial Horizontal Kind equipment pace reducer Parallel Shaft Helical Gearbox
Attributes:
-Substantial performance: 92%-97%
-Compact composition: Small offset output, two stage and three stage are in the identical box.
-High precision: the equipment is created of substantial-good quality alloy metal forging, carbonitriding and hardening therapy, grinding method to ensure large precision and secure operating.
-Higher interchangeability: highly modular, serial layout, powerful flexibility and interchangeability.
Specialized parameters
Ratio | 3.forty one-289.74 |
Enter energy | .12-160KW |
Output torque | sixty one-23200N.m |
Output velocity | five-415rpm |
Mounting type | Foot mounted, flange mounted, foot and flange mounted, one-phase foot mounted, single phase flange mounted, Flange-mounted with prolonged bearing hub |
Enter Technique | Flange enter(AM), shaft input(Advert), inline AC motor input, or AQA servo motor |
Brake Release | HF-manual release(lock in the brake release place), HR-handbook launch(autom-atic braking place) |
Thermistor | TF(Thermistor protection PTC thermisto) TH(Thermistor safety Bimetal swotch) |
Mounting Position | M1, M2, M3, M4, M5, M6 |
Type | S37-S187 |
Output shaft dis. | 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm |
Housing content | HT200 large-energy forged iron from R37,47,57,67,77,87 |
Housing materials | HT250 Substantial strength solid iron from R97 107,137,147,157,167,187 |
Heat treatment technology | carbonitriding and hardening treatment |
Effectiveness | ninety two%-ninety seven% |
Lubricant | VG220 |
Defense Course | IP55, F class |
High quality Management
Top quality:Insist on Improvement,Try for CZPT With the development of tools manufacturing indurstry,consumer in no way satirsfy with the current quality of our items,on the opposite,wcreate the price of top quality.
Good quality plan:to improve the all round amount in the area of electricity transmission
Good quality Check out:Ongoing Enhancement , pursuit of excellence
Quality Philosophy:Quality produces worth
3. Incoming Quality Manage
To establish the AQL acceptable level of incoming content handle, to give the material for the entire inspection, sampling, immunity. On the acceptance of experienced merchandise to warehousing, substandard products to get return, verify, rework, rework inspection responsible for tracking poor, to keep an eye on the provider to take corrective measures to stop recurrence.
4. Procedure Quality Manage
The producing internet site of the initial examination, inspection and last inspection, sampling according to the needs of some projects, judging the high quality alter pattern discovered abnormal phenomenon of production, and supervise the creation department to improve, eradicate the irregular phenomenon or point out
5. FQC(Last QC)
After the producing section will comprehensive the solution, stand in the customer’s position on the concluded item good quality verification, in purchase to make sure the good quality of client anticipations and demands.
six. OQC(Outgoing QC)
Soon after the product sample inspection to establish the experienced, allowing storage, but when the finished solution from the warehouse ahead of the formal supply of the goods, there is a verify, this is named the cargo inspection.Examine content material:In the warehouse storage and transfer status to affirm, while confirming the shipping of the item is a merchandise inspection to determine the qualified
Certifications
packaging
FAQ
one. How to decide on a gearbox which satisfies our necessity?
You can refer to our catalogue to decide on the gearbox or we can aid to choose when you supply
the complex details of needed output torque, output speed and motor parameter etc.
2. What data shall we give ahead of positioning a purchase order?
a) Type of the gearbox, ratio, input and output kind, input flange, mounting place, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other specific needs.
3. What industries are your gearboxes being utilized?
Our gearboxes are extensively employed in the areas of textile, food processing, beverage, chemical business,
escalator,automated storage products, metallurgy, tabacco, environmental safety, logistics and and so forth.
four. Doyou market motors?
We have steady motor suppliers who have been coperating with us for a lengthy-time. They can supply motors
with large quality.
US $50-3,000 / Piece | |
1 Piece (Min. Order) |
###
Application: | Machinery |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Coaxial |
Gear Shape: | Conical – Cylindrical Gear |
Step: | Three-Step |
###
Customization: |
Available
|
---|
###
Ratio | 3.41-289.74 |
Input power | 0.12-160KW |
Output torque | 61-23200N.m |
Output speed | 5-415rpm |
Mounting type | Foot mounted, flange mounted, foot and flange mounted, single-stage foot mounted, single stage flange mounted, Flange-mounted with extended bearing hub |
Input Method | Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor |
Brake Release | HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position) |
Thermistor | TF(Thermistor protection PTC thermisto) TH(Thermistor protection Bimetal swotch) |
Mounting Position | M1, M2, M3, M4, M5, M6 |
Type | S37-S187 |
Output shaft dis. | 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm |
Housing material | HT200 high-strength cast iron from R37,47,57,67,77,87 |
Housing material | HT250 High strength cast iron from R97 107,137,147,157,167,187 |
Heat treatment technology | carbonitriding and hardening treatment |
Efficiency | 92%-97% |
Lubricant | VG220 |
Protection Class | IP55, F class |
US $50-3,000 / Piece | |
1 Piece (Min. Order) |
###
Application: | Machinery |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Coaxial |
Gear Shape: | Conical – Cylindrical Gear |
Step: | Three-Step |
###
Customization: |
Available
|
---|
###
Ratio | 3.41-289.74 |
Input power | 0.12-160KW |
Output torque | 61-23200N.m |
Output speed | 5-415rpm |
Mounting type | Foot mounted, flange mounted, foot and flange mounted, single-stage foot mounted, single stage flange mounted, Flange-mounted with extended bearing hub |
Input Method | Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor |
Brake Release | HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position) |
Thermistor | TF(Thermistor protection PTC thermisto) TH(Thermistor protection Bimetal swotch) |
Mounting Position | M1, M2, M3, M4, M5, M6 |
Type | S37-S187 |
Output shaft dis. | 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm |
Housing material | HT200 high-strength cast iron from R37,47,57,67,77,87 |
Housing material | HT250 High strength cast iron from R97 107,137,147,157,167,187 |
Heat treatment technology | carbonitriding and hardening treatment |
Efficiency | 92%-97% |
Lubricant | VG220 |
Protection Class | IP55, F class |
Helical Gearbox
Using a helical gearbox can greatly improve the accuracy of a machine and reduce the effects of vibration and shaft axis impact. A gearbox is a circular machine part that has teeth that mesh with other teeth. The teeth are cut or inserted and are designed to transmit speed and torque.
Sliding
Among the many types of gearboxes, the helical gearbox is the most commonly used gearbox. This is because the helical gearbox has a sliding contact. The contact between two gear teeth begins at the beginning of one tooth and progresses to line contact as the gear rotates.
Helical gears are cylindrical gears with teeth cut at an angle to the axis. This angle enables helical gears to capture the velocity reversal at the pitch line due to the sliding friction. This leads to a much smoother motion and less wear. Moreover, the helical gearbox is more durable and quieter than other gearboxes.
Helical gears are divided into two categories. The first group comprises of crossed-axis helical gears, commonly used in automobile engine distributor/oil pump shafts. The second group comprises of zero-helix-angle gears, which do not produce axial forces. However, they do create heat, which causes loss of efficiency.
The helical gearbox configuration is often confounded, which results in higher working costs. In addition, the helical gearbox configuration does not have the same torque/$ ratio as zero-helix angle planetary gears.
When designing gears, it is important to consider the effects of gear sliding. Sliding can lead to friction, which can cause loss of power transmission. It also leads to uneven load distribution, which decreases the loadability of the helical planetary gearbox.
In addition, the mesh stiffness of helical gears is commonly ignored by researchers. An analytical model for the mesh stiffness of helical gears has been proposed.
Axial thrust forces
Several options are available for axial thrust forces in helical gearboxes. The most obvious is to use a double helical gear to offset the force component. Another option is to use a thrust bearing with a lower load carrying capacity. This becomes a sacrificial component.
In order to transmit a force, it must be distributed along the contact line. This force is the sum of tangential, radial and axial force components. All these components must be transferred from the source to the output. This is a complex process that involves the use of gears.
The axial force component must be transferred through the gears. The resultant force is then divided into orthogonal components and divided into the thrust directions. The radial force component is from the contact point to the driven gear center.
The axial force component is also determined by the size of the gear’s pitch diameter. A larger pitch diameter results in a greater bearing moment. Similarly, a larger gear ratio will produce a higher torque transmission.
It should be noted that the axial force component is only a small part of the total force. The normal force is distributed along the contact line.
The double helical gear is also not a perfect duplicate of the herringbone gear. It has two equal halves. It is used interchangeably with the herringbone gear. It also has the same helix angle.
Reduced impact on the shaft axis
Increasing the helix angle of a gear pair will reduce resonance effects on the shaft axis of a helical gearbox. However, this will not reduce the overall vibration in the gearbox. In fact, it will increase the vibration. This can lead to serious fatigue faults in the drive train.
This is because the helix angle has an effect on the contact line between two teeth. As the helix angle increases, the length of the contact line decreases. In addition, it has an effect on the normal force and curvature radii of the teeth. The pressure angle also affects the curvature radii.
Helical gears have several advantages over spur gears. These advantages include: lower vibration, NVH (noise, vibration and harshness) characteristics, and smooth operation under heavy loads. They also have better torque capability. However, they produce higher friction. They also require unique approaches to control their thrust forces.
The first step in reducing resonance effects is to regulate the meshing frequency of the helical gear stage. This can be done by varying the shift factors in the gear. If the shift factors are too large, then the gear will experience resonance effects. The helix angle is also affected by the gear’s shift factors. It is therefore important to control the gear’s geometry in order to reduce the resonance effects.
Next, the effects of the web structure and rim thickness on the root stress of the gear are examined. These are measured by strain gage. The results indicate that the maximum root stress is obtained when the worst meshing position is reached.
Quieter operation
Compared to spur gears, helical gears are much quieter in operation. This is due to their larger teeth. Aside from this, they have a higher load-carrying capacity. They also run smoother and have a higher speed capability. Helical gears are also a good substitute for spur gears.
The most significant parameter relating to noise reduction is the gear contact ratio. It ranges from below 1 to more than 10 and is determined by the number of teeth intersecting a parallel shaft line at the pith circle. It is also a good indicator of the level of noise reduction that helical gears provide.
In addition, helical gears have a lower impulse flexure than spur gears. This is because the contact point slides along the helical surface of each tooth. This also adds internal damping to the gear system.
While helical gears are less noisy than spur gears, they do have a high level of wear and tear. This can affect the performance of the gear. However, it is possible to improve the smoothness of the tooth surface by grinding. In addition, running the gears in oil can also help improve the smoothness of the tooth surface.
There are many industries that use helical gears. For example, the automotive industry uses them in their transmissions. They also are used in the agricultural industry. They are often used in heavy trucks.
Helical gears are also known to generate less heat and are quieter than other gears. They can also deliver parallel power transfers between parallel or non-parallel shafts.
Improved accuracy
Increasing the accuracy of a helical gearbox is the key to its operation and reliability. The accuracy of the gearbox is dependent on several features. Among the most important are the profile and lead. Moreover, the power requirements of a gear drive should be taken into consideration.
The profile is the most sensitive feature of a helical gear. If the profile is not symmetric, the gear will run with a noisy spur gear. In addition, the profile is also the most sensitive to lead.
A helical gearbox plays a key role in the power transmission of industrial applications. However, the heavy duty operating conditions make it susceptible to a variety of faults.
A helical gearbox’s performance depends on the accuracy of the individual gears. This is accomplished by minimizing the backlash. A common way to reduce backlash is to approach all target positions from a common direction. This approach also reduces transmission noise.
The accuracy of a helical gearbox can be improved by using a flexible electronic gearbox. This can reduce the degree of twist. Moreover, it can increase the accuracy of gear machining.
A helical gearbox with an electronic gearbox can increase the accuracy of twist compensation. It can also improve the linkage between B-axis, C-axis, and Z-axis. Moreover, the electronic gearbox will ensure the linkage relationship between Y-axis, Z-axis, and C-axis.
The accuracy of a helical Gearbox can be improved by calculating the position error of the gear train. Pitch deviation and helix angle deviation are two types of position error.
Reduced vibration
Using helical gearboxes can reduce vibration and noise. These gears are used in a variety of applications, including automotive transmissions. Moreover, these gears are quiet enough to operate in noise-sensitive applications.
Using CZPT software, three different gearbox housing designs are compared. The external dimensions and mass of each design are kept constant, but different quantities of longitudinal and transverse stiffeners are employed. The resulting models are then compared to experimental results. In addition, the free vibration response of these models is analyzed. The results are shown in Fig. 5.
In terms of noise reduction, the cellular model produces the lowest sound pressure level. However, the cross model produces the higher sound level. The cellular model also produces better peak to peak results.
The input-stage gear pair is the power source of the output-stage gear pair. The output-stage gear pair’s vibration is also studied. This includes a phase diagram and a frequency-domain diagram. The influence of the driving torque and the pinion’s velocity on the vibration is studied in a numerical manner. The time evolution of the normal force and the lubricant stiffness is also studied.
The input-stage pinion modification reduces the input-stage gear pair’s vibration. This reduction is achieved by adding dual bearing support to the input shaft.
editor by czh 2023-01-17