Product Description
TA series shaft mounted gearbox(speed reducer) with helical hardened gears has the characteristics of high carrying capacity, smooth transmission, light weight, low energy consumption and so on. Input shaft of ATA speed reducer is connected with gear motor by belt pulley, hollow output shaft is linked with a key. It can be replaced by electric drum as power for belt conveyors and lifting equipments. ATA series shaft mounted gearbox could be attached with back-stop to avoid the working machine back skating, and conveniently mounted by tie rod. ATA series shaft mounted speed reducer is widely applied in the mining equipments, concrete mixing batching plant, stone crushers, sand making production line and other belt conveyors, mechanical transmission areas.
Mechanical belt conveyors drive system is composed of ATA shaft mounted speed reducer, torque arm, pulleys and gear motors, whose power transmission from the gear motor to the gearbox through the pulley, and then speed reducer passed to the drive pulley through the hollow output shaft and the gearbox is fixed by torque arm, anti-slip device can be configured. The system is convenient to install,use and maintain.
Components:
1. Housing: Nodular Cast Iron(Ductile Iron) QT600
2. Gears Profile: Hardened Helical Gears
3. Gears Material: 20CrMnTi
4. Gears Processing: Carburizing, Quenching, Grinding
5. Gears Hardness: Surface Hardness: HRC58-62, Inner Hardness: HBS156-207
6. Gears Accuracy: 6 Class
7. Shafts Material: 40Cr
8. Input Configurations:
Keyed CZPT Shaft Input
IEC Normalized Motor Flange
9. Output Configurations:
Keyed Hollow Shaft Output
10. Oil Seal: ZheJiang SOG
11. Bearings: NSK, HRB, ZWZ, LYC
12. Spare Parts: Torque arm, Optional Backstop
Gearbox Parameters:
| Models | Output Bore Dia. | Maximum Torque | Nominal Ratio(i) |
| ATA30 | 30mm | 180Nm | 5
7 10 12.5 15 20 25 31 |
| ATA35 | 35mm | 420Nm | |
| ATA40 | 40mm/45mm | 950Nm | |
| ATA45 | 45mm/50mm/55mm | 1400Nm | |
| ATA50 | 50mm/55mm/60mm | 2300Nm | |
| ATA60 | 60mm/70mm | 3600Nm | |
| ATA70 | 70mm/85mm | 5100Nm | |
| ATA80 | 80mm/100mm | 7000Nm | |
| ATA100 | 100mm/125mm | 11000Nm | |
| ATA125 | 125mm/135mm | 17000Nm |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Machinery, Quarry |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Shaft Mounted |
| Samples: |
US$ 180/Piece
1 Piece(Min.Order) | Order Sample blue
|
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Using Helical Gearboxes for Speed Reduction and Speed Increase
Yes, helical gearboxes can be used for both speed reduction and speed increase in various applications. The design of helical gears allows them to transmit motion and power between non-parallel shafts while changing the rotational speed.
Speed Reduction: When the driving gear (pinion) has fewer teeth than the driven gear, the gear ratio leads to speed reduction. This is commonly used in applications where the input speed needs to be decreased while increasing the output torque. For example, helical gearboxes are often employed in conveyor systems to reduce the speed of the motor while maintaining sufficient torque to move heavy loads.
Speed Increase: Helical gearboxes can also achieve speed increase by having the driving gear (pinion) with more teeth than the driven gear. This configuration is less common but can be used to increase the output speed while sacrificing some torque. Speed increase applications are typically seen in scenarios where higher speeds are required, such as in certain types of machinery or industrial processes.
It’s important to note that while helical gearboxes can perform both speed reduction and speed increase, the specific gear ratios and configurations need to be carefully chosen to ensure efficient and reliable operation for the intended application.
Helical Gearboxes and Energy Efficiency
Helical gearboxes play a significant role in enhancing energy efficiency in various industrial processes. Their design and operating characteristics contribute to improved efficiency and reduced energy consumption. Here’s how helical gearboxes achieve energy efficiency:
- Helical Gear Meshing: Helical gears have inclined teeth that engage gradually, resulting in smoother and quieter meshing compared to other gear types. This smoother engagement reduces impact and friction losses, leading to higher efficiency and lower energy consumption.
- Load Distribution: Helical gears distribute the load across multiple teeth due to their helix angle. This even load distribution minimizes stress concentrations and prevents premature wear, ensuring efficient power transmission and reducing the need for frequent maintenance.
- Efficient Power Transmission: The inclined tooth profile of helical gears allows for more teeth to be in contact at any given time. This increased contact area improves power transmission efficiency by reducing sliding friction and minimizing energy losses.
- Reduced Vibration: The helical tooth engagement minimizes vibration and noise levels, which can be particularly advantageous in applications that require precise and stable operation. Reduced vibration translates to lower energy losses and increased overall efficiency.
- Optimized Gear Design: Engineers can fine-tune helical gear designs by adjusting parameters such as helix angle, number of teeth, and gear materials. This optimization process helps tailor the gearbox for specific applications, ensuring optimal efficiency and minimal energy wastage.
- Lubrication and Cooling: Proper lubrication and cooling strategies are crucial for maintaining efficiency. Helical gears benefit from efficient lubrication due to their continuous tooth engagement, which helps reduce friction and wear, further enhancing energy efficiency.
- Advanced Manufacturing: Modern manufacturing techniques enable precise production of helical gears, ensuring tight tolerances and accurate tooth profiles. This manufacturing precision contributes to minimal energy losses during gear operation.
Overall, helical gearboxes excel in energy efficiency by combining smoother tooth engagement, even load distribution, reduced vibration, and optimized designs. Their ability to transmit power efficiently and reliably makes them a preferred choice for industrial processes where energy conservation is a priority.
Advantages of Helical Gearboxes in Industrial Applications
Helical gearboxes offer several advantages that make them well-suited for a wide range of industrial applications. Here are some of the key advantages:
- Smooth and Quiet Operation: The helical design of the gears results in gradual tooth engagement, reducing noise and vibration during operation. This makes helical gearboxes ideal for applications where noise reduction is important.
- High Efficiency: Helical gears provide a larger contact area compared to straight-cut gears, leading to improved power transmission efficiency. The gradual engagement of teeth also reduces energy losses due to friction.
- Higher Load Capacity: The helical angle allows for multiple teeth to be engaged simultaneously, distributing the load across a larger area. This results in higher load-carrying capacity and increased durability of the gearbox.
- Compact Design: Helical gearboxes can achieve high gear ratios with fewer gear stages, leading to a more compact overall design. This is advantageous in applications where space is limited.
- Wide Range of Ratios: Helical gearboxes can achieve a wide range of gear ratios, making them versatile for various speed and torque requirements.
- Less Backlash: The gradual tooth engagement of helical gears results in reduced backlash, which is the play between gear teeth. This leads to improved accuracy and positioning in applications that require precise motion control.
- Heat Dissipation: The helical design allows for better heat dissipation due to the continuous contact between gear teeth. This is beneficial in high-speed applications where heat generation can be a concern.
- Highly Customizable: Helical gearboxes can be customized to meet specific application requirements, including input and output configurations, gear ratios, and mounting options.
Overall, the advantages of helical gearboxes make them a popular choice in industries such as manufacturing, automation, robotics, material handling, and more.
editor by CX 2024-05-02
China factory Tkm Tkb Helical Gear Reductor Belt Conveyor Transmission Hypoid Gearbox manufacturer
Product Description
1. Technical features
The high degree of modularity is a design feature of SKM, SKB series helical-hypoid gear units. It can be connected respectively with motors such as normal mtor, brake motor, explosion -proof motor, frequency conversion motor, servo motor, IEC motor and so on. This kind of product is widely used in drive fields such as textile, foodstuff, ceramice packing, logistics, plastics and so on.
1.1 Product characteristics
SKM SKB Seires helical gear units has more than 4 types. Power 0.12-4kw, Ratio 7.73-302.5, Torque max100-500 NM, Modulaw and multistructure can meet the demands of various conditions.
(1)Ground-hardened helical gears.
(2)Modularity, can be combined in many forms.
(3)Made of high-quality aluminum alloy, light in weight and nonrusting.
(4)Large in output torque, high efficiency, ene-rgy saving and environmental protection.
(5)The mounting dimension of SKM series are compatible with SMRV series worm gear unit(A part of SMRV050 dimensions are different from SKM28)
(6)The mounting dimension of SKB series are compatible with W series worm gear unit.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Function: | Speed Reduction |
|---|---|
| Layout: | Cycloidal |
| Hardness: | Hardened Tooth Surface |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Advancements in Helical Gearbox Technology
Advancements in helical gearbox technology have led to improved performance, efficiency, and versatility. Here are some notable advancements:
- Material Innovations: The use of advanced materials, such as high-strength alloys and composites, has enhanced the durability and load-carrying capacity of helical gears. These materials also contribute to reduced weight and improved efficiency.
- Precision Manufacturing: Modern manufacturing techniques, including CNC machining and gear grinding, have enabled the production of helical gears with higher accuracy and tighter tolerances. This results in smoother operation and reduced noise levels.
- Gear Tooth Profile Optimization: Advanced computer simulations and modeling techniques allow for the optimization of gear tooth profiles. This results in better load distribution, reduced stress concentration, and improved overall gearbox efficiency.
- Lubrication and Cooling: Improved lubrication systems and cooling mechanisms help maintain optimal operating temperatures and extend the lifespan of helical gearboxes. This is particularly important for high-demand applications.
- Noise and Vibration Reduction: Innovative designs and precision manufacturing techniques have led to helical gears with reduced noise and vibration levels. This advancement is crucial for industries where noise reduction is a priority.
- Compact Design: Advancements in gear design and manufacturing have allowed for more compact and lightweight helical gearbox configurations, making them suitable for space-constrained environments.
- Integration with Electronics: Some modern helical gearboxes are designed for seamless integration with electronic control systems. This enables better monitoring, control, and optimization of gearbox performance.
- Customization: Advancements in manufacturing and design tools allow for greater customization of helical gearboxes to meet specific application requirements. This includes adapting gear ratios, sizes, and configurations.
In summary, advancements in helical gearbox technology have led to enhanced performance, durability, efficiency, and customization options. These innovations continue to make helical gearboxes a versatile and reliable choice for a wide range of industrial applications.
Relationship Between Helix Angle and Load Capacity in Helical Gears
The helix angle of helical gears plays a significant role in determining their load-carrying capacity and overall performance. Here’s the relationship between the helix angle and load capacity:
1. Load Distribution: The helix angle affects how the load is distributed along the gear teeth. A larger helix angle results in a more gradual tooth engagement, allowing for smoother load sharing across multiple teeth. This improves the gear’s ability to handle higher loads.
2. Contact Ratio: The contact ratio, which indicates the number of teeth in contact at any given time, increases with a larger helix angle. A higher contact ratio helps distribute the load over a larger area of the gear teeth, enhancing load-carrying capacity.
3. Tooth Meshing: The helix angle affects how the teeth mesh with each other. A higher helix angle promotes gradual and smoother meshing, reducing the concentration of stress on individual teeth. This results in improved resistance to wear and fatigue.
4. Axial Thrust: Helical gears produce axial thrust due to their helical nature. This thrust can affect the gear’s ability to handle radial loads. Proper consideration of the helix angle can help manage axial thrust and prevent overloading.
5. Lubrication: The helix angle affects the lubrication conditions between gear teeth. A larger helix angle may allow better oil flow and lubrication, reducing friction and wear, thereby enhancing load capacity.
6. Noise and Vibration: The helix angle also influences noise and vibration levels in helical gears. Optimal helix angle selection can minimize noise and vibration, contributing to smoother operation and prolonged gear life.
Optimal Helix Angle Selection: While a larger helix angle generally increases load capacity, it’s important to strike a balance. Extremely large helix angles can lead to reduced tooth strength and efficiency. Engineers consider factors like application requirements, tooth strength, and noise considerations when selecting the optimal helix angle for a specific gear design.
The relationship between the helix angle and load capacity underscores the importance of proper gear design to ensure optimal performance, durability, and reliability in various applications.
Limitations and Disadvantages of Helical Gear Systems
While helical gear systems offer numerous advantages, they also come with certain limitations and disadvantages:
- Axial Thrust: Helical gears generate axial thrust due to the helix angle of the teeth. This thrust can cause additional load on bearings and may require additional measures to counteract.
- Complex Manufacturing: The manufacturing process for helical gears is more complex than that of straight-toothed gears, which can lead to higher production costs.
- Axial Length: Helical gears require more axial space compared to spur gears with the same gear ratio. This can be a limitation in applications with space constraints.
- Sliding Contact: Helical gears have sliding contact between their teeth, which can result in higher friction and more heat generation compared to rolling contact gears.
- Efficiency: Although helical gears are generally efficient, their efficiency can be slightly lower than that of some other gear types, especially at high speeds.
- Complexity in Gearbox Design: The inclination of helical gear teeth introduces additional complexity in gearbox design and alignment.
- Reverse Thrust: In some cases, reverse thrust can occur when helical gears are subjected to high axial loads, leading to undesirable effects.
It’s important to consider these limitations and disadvantages when selecting gear systems for specific applications. Despite these challenges, helical gears remain a popular choice in various industries due to their benefits and overall performance characteristics.
editor by CX 2024-04-22
China OEM R47 Right Angle Helical Gear Reductor Belt Conveyor Drives Speed Reducer Helical Gearbox for Textile Industry gearbox adjustment
Product Description
R47 Right Angle Helical Gear Reductor Belt Conveyor Drives Speed Reducer Helical Gearbox for Textile Industry
F series differential gearbox is 1 kind of parallel shaft helical gear reducer , which consist of 2 or 3 stageshelical
gears (relate to gear ratio) in the same case . The hard tooth surface gear use the high quality alloy steel ,the
process of carburizing and quenching, grinding ,which give it follow characters :Stable transmission ,low noise
and temperature ,high loading ,long working lift . Wide application ,specialize in Metallurgy ,Sewage treatment,
Chemical Industry , Pharmacy ,Agriculture equipment and Oil industry
1) Output speed: 0.6~1,571r/min
2) Output torque: up to 21700N.m
3) Motor power: 0.12~200kW
4) Mounted form: foot-mounted and flange-mounted mounting
|
Gear Material |
20CrMnTi |
|
Case Material |
HT250 |
|
Shaft Material |
20CrMnTi |
|
Gear Processing |
Grinding finish by HOFLER Grinding Machines |
|
Color |
Customized |
|
Noise Test |
65~70dB |
|
Efficiency |
94%~98% (depends on the transmission stage) |
|
Lubricating oil |
Shell Omala synthetic oil or mineral oil , or similar brand |
|
Heat treatment |
tempering, cementiting, quenching,etc. |
|
Brand of bearings |
C&U bearing, ZWZ,LYC, HRB,NSK and so on |
|
Brand of oil seal |
NAK or other brand |
|
Temp. rise (MAX) |
40 ° |
|
Temp. rise (Oil)(MAX) |
50 ° |
|
Vibration |
≤20µm |
Related product
Company Profile
Packing & Delivery
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | 90 Degree |
| Layout: | Coaxial |
| Gear Shape: | Worm Gear |
| Step: | Single-Step |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
Key Factors for Selecting a Helical Gearbox
Choosing the right helical gearbox for an application involves considering several key factors:
- Load and Torque: Evaluate the maximum load and torque requirements to ensure the gearbox can handle the application’s demands.
- Speed Range: Determine the required speed range and ensure the gearbox’s gear ratios can accommodate it.
- Efficiency: Helical gearboxes are known for their high efficiency. Select a gearbox with efficiency ratings that meet your application’s needs.
- Space Constraints: Consider the available installation space and choose a compact gearbox that fits within the available dimensions.
- Mounting Position: The mounting position affects lubrication, cooling, and overall performance. Ensure the gearbox is suitable for the desired mounting orientation.
- Service Life: Choose a gearbox with a service life that matches your application’s expected lifespan.
- Backlash: Evaluate the allowable backlash, which affects precision and positioning accuracy.
- Noise and Vibration: Assess the acceptable noise and vibration levels and choose a gearbox with suitable characteristics.
- Environmental Conditions: Consider factors like temperature, humidity, and dust levels to ensure the gearbox can operate reliably in the application environment.
- Maintenance: Factor in maintenance requirements and choose a gearbox with manageable maintenance needs.
- Cost: Balance performance with budget constraints to find a gearbox that offers the best value for your application.
By carefully evaluating these factors, you can select a helical gearbox that optimally meets your application’s requirements and ensures efficient and reliable operation.
Impact of Thermal Expansion on Helical Gearbox Performance
Thermal expansion can significantly affect the performance of helical gearboxes due to changes in dimensions and clearances caused by temperature variations. Here’s how it impacts:
1. Misalignment: Temperature changes can lead to differential expansion of gearbox components. This can result in misalignment of gears, shafts, and bearings, leading to increased friction, noise, and reduced efficiency.
2. Lubrication: Thermal expansion can alter the clearances within the gearbox, affecting the distribution and viscosity of the lubricating oil. Inadequate lubrication due to temperature-induced changes can result in increased wear and premature failure.
3. Gear Tooth Engagement: Temperature fluctuations can cause gear teeth to expand or contract, affecting the meshing engagement and load distribution. Inconsistent gear tooth contact can lead to uneven wear and reduced gear life.
4. Bearing Performance: Bearings in helical gearboxes are sensitive to temperature changes. Excessive heat can lead to reduced bearing life, increased friction, and potential seizure, affecting overall gearbox performance.
5. Noise and Vibration: Thermal expansion can lead to changes in gear and component clearances, resulting in altered vibration patterns and increased noise levels. This can impact the comfort of the system and indicate potential issues.
6. Material Fatigue: Repeated cycles of thermal expansion and contraction can lead to material fatigue and stress accumulation, reducing the overall lifespan of gearbox components.
Managing Thermal Effects: Manufacturers design helical gearboxes with considerations for thermal expansion, using materials with low coefficients of thermal expansion and incorporating features like expansion joints or thermal isolators. Proper lubrication, monitoring temperature, and maintaining consistent operating conditions are also crucial in mitigating thermal expansion effects.
Understanding and managing the impact of thermal expansion is essential to maintain the performance, efficiency, and durability of helical gearboxes.
Differences Between Helical Gearboxes and Spur Gearboxes
Helical gearboxes and spur gearboxes are two common types of gearboxes used in various applications. Here are the key differences between them:
- Tooth Design: The main difference between helical and spur gearboxes lies in their tooth design. Helical gearboxes feature helical teeth that are cut at an angle to the gear axis, while spur gearboxes have straight-cut teeth that run parallel to the gear axis.
- Engagement: Helical gearboxes offer a gradual and smooth engagement of teeth due to their helical tooth design. This results in reduced noise and vibration compared to spur gearboxes, which can have more abrupt and noisy tooth engagement.
- Load Distribution: Helical gearboxes have a higher contact ratio between teeth at any given time, which leads to better load distribution across the gear teeth. Spur gearboxes, on the other hand, have fewer teeth in contact at a time, potentially leading to higher stress on individual teeth.
- Efficiency: Helical gearboxes tend to be more efficient than spur gearboxes due to the helical tooth design, which reduces friction and energy losses during gear meshing. The gradual engagement of helical teeth contributes to this higher efficiency.
- Noise and Vibration: Helical gearboxes generate less noise and vibration compared to spur gearboxes. The helical tooth design and smooth engagement help in reducing the impact of gear meshing on overall noise levels.
- Applications: Helical gearboxes are commonly used in applications that require higher torque and smoother operation, such as heavy machinery, automotive transmissions, and industrial equipment. Spur gearboxes are suitable for applications with moderate loads and where noise considerations are not critical.
Overall, helical gearboxes offer advantages in terms of efficiency, load distribution, and noise reduction compared to spur gearboxes. However, the choice between the two depends on specific application requirements and factors such as torque, speed, space constraints, and noise considerations.
editor by CX 2023-12-04
China Professional R Series Inline Horizontal Helical Gearbox for Belt Conveyor R137-24-30kw sequential gearbox
Product Description
Detailed Photos
Product Parameters
R Series reducers are designed and manufactured on the basis of modular combination system.
There are a lot of motor combinations, installation forms and structural schemes. The transmission
ratio is classified and fine to meet different operating conditions, and the performance is superior.
Reinforced high rigid cast iron box; The hardened gear is made of high-quality alloy steel. Its surface
is carburized, quenched and hardened, and the gear is finely ground. It has stable transmission, low
noise, and large bearing capacity. Low temperature rise, long service life. It is widely used in metallurgy,1. Features: small offset output, compact structure, maximum use of box space, use of integral casting box, good stiffness, can improve the strength of the shaft and bearing life.
2. Installation type and output mode: bottom seated type and large and small flange type installation, CZPT shaft output.
3. Input mode: direct motor, shaft input and connecting flange input.
4. Reduction ratio: secondary 5~24.8, tertiary 27.2~264, R/R combination up to 18125.
5. Average efficiency: Class II 96%, Class III 94%, R/R combination 85%.
6. The R series specially designed for mixing can bear large axial and radial forces.
Technical parameters:
Coaxial coaxial output
R reducer
Power: 0.12KW~160KW
Torque: 1.4N · m ~ 23200N · m
Output speed: 0.06 ~ 1090r/min
Model example:
R17-Y4-4P-32.40-M1-0°
R: Series code
F: Shaft extension flange installation
17: Machine model
Y: Three phase AC asynchronous motor
4: Motor power
4P: motor stage
32.40: Transmission ratio
M1: Installation type
0 °: junction box position (0 ° – 270 °)
R series helical gear hardened gear reducer
Basic model of R series reducer:
R17R27R37R47R57R67R77R87R97R107R137R147R167
RF17RF27RF37RF47RF57RF67RF77RF87RF97RF107RF137RF147RF167
RX37RX57RX67RX77RX87RX97RX107RX127RX157
RXF37RXF57RXF67RXF77RXF87RXF97RXF107RXF127RXF157
R series helical gear reducer with hard tooth surface features small size, light weight, high bearing capacity, high efficiency, long service life, convenient installation, wide motor power range, fine transmission ratio classification, etc. It can be widely used in equipment that needs to be decelerated in various industries.
sewage treatment, chemical industry, pharmacy and other industries.
| Hardness: | Hardened Tooth Surface |
|---|---|
| Installation: | Horizontal Type |
| Layout: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Step: | Single-Step |
| Type: | Gear Reducer |
| Samples: |
US$ 1780/Piece
1 Piece(Min.Order) | |
|---|
Using Helical Gearboxes for Speed Reduction and Speed Increase
Yes, helical gearboxes can be used for both speed reduction and speed increase in various applications. The design of helical gears allows them to transmit motion and power between non-parallel shafts while changing the rotational speed.
Speed Reduction: When the driving gear (pinion) has fewer teeth than the driven gear, the gear ratio leads to speed reduction. This is commonly used in applications where the input speed needs to be decreased while increasing the output torque. For example, helical gearboxes are often employed in conveyor systems to reduce the speed of the motor while maintaining sufficient torque to move heavy loads.
Speed Increase: Helical gearboxes can also achieve speed increase by having the driving gear (pinion) with more teeth than the driven gear. This configuration is less common but can be used to increase the output speed while sacrificing some torque. Speed increase applications are typically seen in scenarios where higher speeds are required, such as in certain types of machinery or industrial processes.
It’s important to note that while helical gearboxes can perform both speed reduction and speed increase, the specific gear ratios and configurations need to be carefully chosen to ensure efficient and reliable operation for the intended application.
Relationship Between Helix Angle and Load Capacity in Helical Gears
The helix angle of helical gears plays a significant role in determining their load-carrying capacity and overall performance. Here’s the relationship between the helix angle and load capacity:
1. Load Distribution: The helix angle affects how the load is distributed along the gear teeth. A larger helix angle results in a more gradual tooth engagement, allowing for smoother load sharing across multiple teeth. This improves the gear’s ability to handle higher loads.
2. Contact Ratio: The contact ratio, which indicates the number of teeth in contact at any given time, increases with a larger helix angle. A higher contact ratio helps distribute the load over a larger area of the gear teeth, enhancing load-carrying capacity.
3. Tooth Meshing: The helix angle affects how the teeth mesh with each other. A higher helix angle promotes gradual and smoother meshing, reducing the concentration of stress on individual teeth. This results in improved resistance to wear and fatigue.
4. Axial Thrust: Helical gears produce axial thrust due to their helical nature. This thrust can affect the gear’s ability to handle radial loads. Proper consideration of the helix angle can help manage axial thrust and prevent overloading.
5. Lubrication: The helix angle affects the lubrication conditions between gear teeth. A larger helix angle may allow better oil flow and lubrication, reducing friction and wear, thereby enhancing load capacity.
6. Noise and Vibration: The helix angle also influences noise and vibration levels in helical gears. Optimal helix angle selection can minimize noise and vibration, contributing to smoother operation and prolonged gear life.
Optimal Helix Angle Selection: While a larger helix angle generally increases load capacity, it’s important to strike a balance. Extremely large helix angles can lead to reduced tooth strength and efficiency. Engineers consider factors like application requirements, tooth strength, and noise considerations when selecting the optimal helix angle for a specific gear design.
The relationship between the helix angle and load capacity underscores the importance of proper gear design to ensure optimal performance, durability, and reliability in various applications.
Handling High Torque and Heavy Loads in Helical Gearboxes
Helical gearboxes are well-suited for handling high torque and heavy loads due to their unique design and meshing characteristics:
- Helical Teeth: The helical shape of the gear teeth allows for gradual and continuous contact between the teeth during meshing. This results in smoother load distribution and reduced impact forces, making helical gears capable of handling heavy loads.
- Multiple Tooth Contact: Helical gears have multiple teeth in contact at any given time, spreading the load over a larger area of gear teeth. This helps to distribute the load evenly and prevent localized wear and stress concentrations.
- Increased Tooth Strength: The inclined orientation of helical gear teeth increases the tooth width, leading to greater tooth strength and improved load-carrying capacity.
- Bearings and Shaft Design: The gearbox housing is designed to support heavy loads and provide proper alignment for the shafts and bearings. High-quality bearings and shafts help distribute the load and reduce wear.
- Lubrication: Adequate lubrication is crucial to minimize friction and heat generation between gear teeth. Proper lubrication also helps to dissipate heat generated by the heavy loads.
- Material Selection: High-strength materials with good wear resistance properties are chosen for helical gears to ensure they can withstand the demands of heavy loads.
Overall, the gradual engagement of helical gear teeth and their ability to handle multiple tooth contact positions them as a reliable choice for applications that require high torque and can handle heavy loads. Engineers carefully design helical gearboxes to ensure they can withstand the stresses imposed by the application’s specific requirements.
editor by CX 2023-10-25
China Professional R Series Belt Conveyor Helical Gearbox helical gearbox diagram
Product Description
R/F/K/S Parallel Shaft Gearbox Speed Reducer for Screw Pumps
Features:
1. Compact structure and simple assembly;
2. Wide speed ranges and high torque;
3. Low noise, good sealing performance, high efficiency;
4. Stable and safe, long lifetime, universal;
5. Multi-structure, various assembling methods
Product photo:
Specification:
| ANG Helical Gear Motor | |
| Model | R17 ~ 187, F37-177, K37-187, S37-97 |
| Input power | 0.06kw ~ 250kw |
| Input speed | 750rpm ~ 3000rpm |
| Reduction ratio | 1/1.3 ~ 1/27000 |
| Input motor | AC (1 phase or 3 phase) / DC / BLDC motor |
| Install type | Foot / CZPT shaft / Hollow shaft / Output flange… |
| Efficiency | 94% ~ 98 % for R F K series |
| Material of housing | die-cast aluminum / Cast iron / Stainless steel |
| Precision of gear | Accurate grinding, class 6 |
| Heat treatment | Carburizing and quenching |
| Accessories | Brake / Flange / Motor adapter / Torque arm … |
FAQ
Q: Can you make the gear motor with customization?
A: Yes, we can customize per your request, like power, voltage, speed, shaft size, flange, terminal box, IP grade, etc.
Q: Do you provide samples?
A: Yes. Sample is available for testing.
Q: What is your MOQ?
A: It is 1pcs for the beginning of our business.
Q: What’s your lead time?
A: Standard product need 5-30days, a bit longer for customized products.
Q: Do you provide technology support?
A: Yes. Our company have design and development team, we can provide technology support if you
need.
Q: How to ship to us?
A: It is available by air, or by sea, or by train.
Q: How to pay the money?
A: T/T and L/C is preferred, with different currency, including USD, EUR, RMB, etc.
Q: How can I know the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.
Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.
Q: How shall we contact you?
A: You can send inquiry directly, and we will respond within 24 hours.
| Application: | Motor, Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal/Vertical |
| Samples: |
US$ 300/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Advantages of a Helical Gearbox
Usually helical gearboxes are used for industrial purposes. They are usually found in power generation units, where the input of energy is converted into output. There are several different types of helical gearboxes, including spiral and herringbone. You should familiarize yourself with the different types before choosing one for your project.
Helix angle
Generally, the angle between a gear tooth and its shaft axis is called the helix angle. This angle is important in motion conversion and power transfer. It is not to be confused with the lead angle, which is used to reference a line perpendicular to the axis of the gear.
The helical gearbox is used in several industrial applications. The oil and sugar industries, blowers, and feeders are among those that utilize helical gears. They are smoother than spur gears, and they also have quieter operation.
Helical gearboxes can be made modularly. This allows for more economical construction and interchangeability of components. These gearboxes are also used in enclosed gear systems. In a helical gearbox, each section of the box must stagger in a different direction. This helps in maintaining the integrity of the component.
Helical gears can be used in applications that require a high degree of quality control. This is necessary to minimize the effects of wear and tear. The use of extreme pressure lubricants is recommended for helical gears that operate at right angles. However, these are not recommended for bronze gears.
Besides the helix angle, the contact ratio also affects the performance of the gear. The more surface contact between the teeth, the greater the sliding. The heat produced is also detrimental to performance. It is necessary to use a lubricant that will reduce friction between the tooth surfaces. Proper lubrication reduces wear and minimizes heat.
When determining the optimum helix angle for a gear, it is important to consider the diameter of the gear. Helical gears have a minimum helix angle of 15 to 30 degrees. A higher helix angle increases the axial force generated by the gear, and a lower helix angle increases the contact stress.
Spiral gears
Using spiral gears in a helical gearbox offers several advantages, including smoothness and quiet operation. In addition, helical gearboxes are highly effective and can tolerate more load. Spiral gears are also more cost effective. However, they are more difficult to produce.
Helical gears are similar to spur gears in that they have teeth at an angle. However, the helix angle of the teeth in a helical gear is not fixed. This angle affects the position of the tooth’s contact with the mating gear. It also affects the normal force of the teeth.
The helix angle of the gear’s teeth is also dependent on the direction of rotation of the gear. For example, a spiral gear with a helix angle of 15 degrees is usually perpendicular to the axis of the gear. Similarly, a helical gear with a helix angle of 30 degrees is usually oblique to the axis of the gear.
Helical gears also provide a method for connecting shafts that are not parallel. These gears are usually used in industries such as conveyors, food industries, plastic industries, and oil industries. The main advantage of helical gears is that they are smoother than spur gears. However, the downside is higher wear and friction.
Helical gears are also used to transmit motion between parallel shafts. Helical gears are also used in high-load applications. This makes them a good choice for heavy-duty applications.
Helical gears are also superior to spur gears in load carrying capacity. Helical gears are smoother and quieter than spur gears. However, they also have a higher friction factor. In addition, they require special hobbing cutters.
Helical gears can also be classified according to their reference section in the standard plane. The center gap of helical gears with a reference section in the turning plane is the same as that of spur gears.
Herringbone gears
Among the different types of gearboxes, the helical gearbox is one of the most common. It is widely used in industrial applications, such as geared motors, worm gearboxes, and planetary gear trains.
A helical gear is a directional gear with a vertical axis. Its unique feature is the helix angle, which is the angle of the helix on the indexing cylindrical surface. The helix angle is set to a value of eight to fifteen degrees in design. The real radial pitch, which is the pitch of the gear when it rotates clockwise, varies with the helix angle.
Helical gears are classified according to the reference section in the turning and standard planes. Helical gears with a reference section in the standard plane have the same number of teeth as spur gears. On the other hand, helical gears with a reference section in a turning plane have the same center gap as spur gears.
The main advantage of helical gears is the high power-to-weight ratio. Aside from that, they are compact and have good meshing performance.
Another advantage is their high torque carrying capacity. This can be achieved by increasing the helix angle. The larger the helix angle, the smoother the gear’s motion. Moreover, the larger the helix angle, the larger the coincidence degree. This is useful in applications with high shock and vibration.
The production process for herringbone gears is more difficult and expensive than the other types. It is difficult to cut and shape herringbone gears. A simple gear hobbing machine is not suitable for this type of gear. However, the milling process can be used to process some herringbone gears.
Some of the problems related to herringbone gears are a lack of axial load, high friction and the interference of axial component forces. The meshing of teeth in herringbone gears can help reduce these problems.
Noise, vibration & harshness (NVH) characteristics
NVH testing is an important aspect of new driveline product development. It is typically performed during passenger car development, and is used for quality assurance of exterior and interior noise. This is an important topic in hybrid vehicles and electric vehicles, and continues to grow as the automotive industry expands.
A typical NVH test involves a rolling road dynamometer and signals are recorded and stored on a hard disk. These are then processed to produce variation distributions. Among other things, a lumped parameter system dynamics model was developed to run large size DOE studies efficiently.
Among the many components in the NVH chain, the bevel gear plays a major role in the final drive. Its characteristics are complex and time-varying, but they are important enough to be studied.
A new bevel gear OTE calculation method will be discussed in this paper. It is important to note that the NVH performance of an electric drive helical gear transmission system can be improved by thermal deformation of the bearing. It is also possible to achieve robust NVH performance in aluminum axle design by optimizing gear design, bearing optimization, and driveline system dynamics.
The gear train also has some lesser-known NVH performance characteristics. It is known that a gear train is an excitation source, and this is the topic of another study. It is also important to note that a helical gear system will exhibit non-linear behaviors when it changes working speed.
Applications
Compared to spur gears, helical gears offer greater load carrying capacity and smoother operation. They are also quieter, as the gears have larger teeth. These are the main reasons for their widespread use.
The main difference between helical gears and spur gears is the way teeth are cut. Teeth in helical gears are cut at an angle, in order to allow more teeth to interact in the same direction. This reduces shock loads and vibration. Helical gears are also much more durable than spur gears.
Helical gears can be used in a variety of applications. They are often chosen over spur gears for applications that require non-parallel shafts. They are also popular in the printing industry, the plastics industry, and the cement industry. They can also be used in conveyors and coolers.
Helical gears are made of a material that provides excellent durability, corrosion resistance, and a strong working load. They are also less expensive to produce. They are attached to a shaft using a press fit or adhesive. The attachment method can be a hub or an integral shaft.
Helical gears are also produced in a radial module form. This is the most economical option. This allows helical gears to be manufactured in a compact format. It also ensures that the bearing positioning requirements are met.
Helical gears are also produced with special grinding stones. These are needed for every helix angle. The helix angle determines the real radial pitch. This also affects the normal force of the tooth.
When mating helical gears to parallel shafts, they are right-handed. These gears can be made with a normal module set or by using special hobbing tools.
editor by CX 2023-10-20
China high quality R Series Belt Conveyor Helical Gearbox bevel gearbox
Product Description
Detailed Photos
Product Description
Product Features
High modular design.
Integrated casting housing,compact dimension,high loading support, stable transmitting and low noise level.
Perfect oil leakage preventing makes the good sealings and can be used in wide range of industry.
This series is special for pug mill.
High efficiency and save power.
Save cost and low maintenance.
Product Parameters
Technical data:
|
Housing material |
Cast iron/Ductile iron |
|
Housing hardness |
HBS190-240 |
|
Gear material |
20CrMnTi alloy steel |
|
Surface hardness of gears |
HRC58°~62 ° |
|
Gear core hardness |
HRC33~40 |
|
Input / Output shaft material |
42CrMo alloy steel |
|
Input / Output shaft hardness |
HRC25~30 |
|
Machining precision of gears |
accurate grinding, 6~5 Grade |
|
Lubricating oil |
GB L-CKC220-460, Shell Omala220-460 |
|
Heat treatment |
tempering, cementiting, quenching, etc. |
|
Efficiency |
94%~96% (depends on the transmission stage) |
|
Noise (MAX) |
60~68dB |
|
Temp. rise (MAX) |
40°C |
|
Temp. rise (Oil)(MAX) |
50°C |
|
Vibration |
≤20µm |
|
Backlash |
≤20Arcmin |
|
Brand of bearings |
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, INA, NSK. |
|
Brand of oil seal |
NAK — ZheJiang or other brands requested |
Our Advantages
Packaging & Shipping
Certifications
Company Profile
Xihu (West Lake) Dis.ng Transmission Equipment Co., Ltd. located HangZhou city, ZHangZhoug, as 1 professional
manufacturer and exporter of cycloidal pin wheel reducer,worm reducer, gear reducer, gearbox ,
AC motor and relative spare parts, owns rich experience in this line for many years.
We are 1 direct factory, with advanced production equipment, the strong development team and
producing capacity to offer quality products for customers.
Our products widely served to various industries of Metallurgy, Chemicals, lifting,mining,Petroleum,textile,medicine,wooden etc. Main markets: China, Africa,Australia,Vietnam,
Turkey,Japan, Korea, Philippines…
Welcome to ask us any questions, good offer always for you for long term business.
FAQ
Q: Are you trading company or manufacturer?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock.
Q: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.
Q:How to choose a gearbox which meets your requirement?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
Q: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
| Application: | Motor, Machinery, Marine, Agricultural Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Layout: | Coaxial |
| Gear Shape: | Helical |
| Step: | Single-Step |
Key Factors for Selecting a Helical Gearbox
Choosing the right helical gearbox for an application involves considering several key factors:
- Load and Torque: Evaluate the maximum load and torque requirements to ensure the gearbox can handle the application’s demands.
- Speed Range: Determine the required speed range and ensure the gearbox’s gear ratios can accommodate it.
- Efficiency: Helical gearboxes are known for their high efficiency. Select a gearbox with efficiency ratings that meet your application’s needs.
- Space Constraints: Consider the available installation space and choose a compact gearbox that fits within the available dimensions.
- Mounting Position: The mounting position affects lubrication, cooling, and overall performance. Ensure the gearbox is suitable for the desired mounting orientation.
- Service Life: Choose a gearbox with a service life that matches your application’s expected lifespan.
- Backlash: Evaluate the allowable backlash, which affects precision and positioning accuracy.
- Noise and Vibration: Assess the acceptable noise and vibration levels and choose a gearbox with suitable characteristics.
- Environmental Conditions: Consider factors like temperature, humidity, and dust levels to ensure the gearbox can operate reliably in the application environment.
- Maintenance: Factor in maintenance requirements and choose a gearbox with manageable maintenance needs.
- Cost: Balance performance with budget constraints to find a gearbox that offers the best value for your application.
By carefully evaluating these factors, you can select a helical gearbox that optimally meets your application’s requirements and ensures efficient and reliable operation.
Helical Gearboxes and Energy Efficiency
Helical gearboxes play a significant role in enhancing energy efficiency in various industrial processes. Their design and operating characteristics contribute to improved efficiency and reduced energy consumption. Here’s how helical gearboxes achieve energy efficiency:
- Helical Gear Meshing: Helical gears have inclined teeth that engage gradually, resulting in smoother and quieter meshing compared to other gear types. This smoother engagement reduces impact and friction losses, leading to higher efficiency and lower energy consumption.
- Load Distribution: Helical gears distribute the load across multiple teeth due to their helix angle. This even load distribution minimizes stress concentrations and prevents premature wear, ensuring efficient power transmission and reducing the need for frequent maintenance.
- Efficient Power Transmission: The inclined tooth profile of helical gears allows for more teeth to be in contact at any given time. This increased contact area improves power transmission efficiency by reducing sliding friction and minimizing energy losses.
- Reduced Vibration: The helical tooth engagement minimizes vibration and noise levels, which can be particularly advantageous in applications that require precise and stable operation. Reduced vibration translates to lower energy losses and increased overall efficiency.
- Optimized Gear Design: Engineers can fine-tune helical gear designs by adjusting parameters such as helix angle, number of teeth, and gear materials. This optimization process helps tailor the gearbox for specific applications, ensuring optimal efficiency and minimal energy wastage.
- Lubrication and Cooling: Proper lubrication and cooling strategies are crucial for maintaining efficiency. Helical gears benefit from efficient lubrication due to their continuous tooth engagement, which helps reduce friction and wear, further enhancing energy efficiency.
- Advanced Manufacturing: Modern manufacturing techniques enable precise production of helical gears, ensuring tight tolerances and accurate tooth profiles. This manufacturing precision contributes to minimal energy losses during gear operation.
Overall, helical gearboxes excel in energy efficiency by combining smoother tooth engagement, even load distribution, reduced vibration, and optimized designs. Their ability to transmit power efficiently and reliably makes them a preferred choice for industrial processes where energy conservation is a priority.
Helical Gearbox: Overview and Working Mechanism
A helical gearbox is a type of mechanical device used to transmit power and motion between rotating shafts. It employs helical gears, which are cylindrical gears with teeth that are cut at an angle to the gear axis. This design feature gives helical gearboxes their distinctive helical shape and provides several advantages in terms of efficiency, smoothness, and load-bearing capabilities.
The working mechanism of a helical gearbox involves the interaction of helical gears, which mesh together to transmit torque and motion. Here’s how it works:
- Gear Tooth Engagement: When power is applied to the input shaft of the gearbox, the helical gear on the input shaft meshes with the helical gear on the output shaft.
- Helical Angle: The helical angle of the gear teeth causes a gradual engagement between the teeth, resulting in a smooth and quiet meshing process compared to straight-cut gears.
- Torque Transfer: As the input gear rotates, it transfers rotational force (torque) to the output gear through the meshing of their helical teeth.
- Direction of Rotation: Depending on the arrangement of the helical gears, the output shaft’s direction of rotation can be the same as or opposite to that of the input shaft.
- Load Distribution: The helical design allows for multiple teeth to be engaged at any given moment, distributing the load more evenly across the gears. This results in higher load-carrying capacity and reduced wear on gear teeth.
- Efficiency: Helical gearboxes are known for their high efficiency due to the gradual tooth engagement and larger contact area, resulting in minimal energy loss as compared to other gear types.
Helical gearboxes find applications in various industries where smooth operation, high efficiency, and compact design are important. They are commonly used in machinery, conveyors, automotive transmissions, industrial equipment, and more.
editor by CX 2023-09-04
China Good quality Right Angle Gear Motor Belt Conveyor Motor Reducer Helical Bevel Gearbox for Screw Conveyor helical gears advantages and disadvantages
Product Description
Detailed Photos
Product Parameters
R Series reducers are designed and manufactured on the basis of modular combination system.
There are a lot of motor combinations, installation forms and structural schemes. The transmission
ratio is classified and fine to meet different operating conditions, and the performance is superior.
Reinforced high rigid cast iron box; The hardened gear is made of high-quality alloy steel. Its surface
is carburized, quenched and hardened, and the gear is finely ground. It has stable transmission, low
noise, and large bearing capacity. Low temperature rise, long service life. It is widely used in metallurgy,1. Features: small offset output, compact structure, maximum use of box space, use of integral casting box, good stiffness, can improve the strength of the shaft and bearing life.
2. Installation type and output mode: bottom seated type and large and small flange type installation, CZPT shaft output.
3. Input mode: direct motor, shaft input and connecting flange input.
4. Reduction ratio: secondary 5~24.8, tertiary 27.2~264, R/R combination up to 18125.
5. Average efficiency: Class II 96%, Class III 94%, R/R combination 85%.
6. The R series specially designed for mixing can bear large axial and radial forces.
Technical parameters:
Coaxial coaxial output
R reducer
Power: 0.12KW~160KW
Torque: 1.4N · m ~ 23200N · m
Output speed: 0.06 ~ 1090r/min
Model example:
R17-Y4-4P-32.40-M1-0°
R: Series code
F: Shaft extension flange installation
17: Machine model
Y: Three phase AC asynchronous motor
4: Motor power
4P: motor stage
32.40: Transmission ratio
M1: Installation type
0 °: junction box position (0 ° – 270 °)
R series helical gear hardened gear reducer
Basic model of R series reducer:
R17R27R37R47R57R67R77R87R97R107R137R147R167
RF17RF27RF37RF47RF57RF67RF77RF87RF97RF107RF137RF147RF167
RX37RX57RX67RX77RX87RX97RX107RX127RX157
RXF37RXF57RXF67RXF77RXF87RXF97RXF107RXF127RXF157
R series helical gear reducer with hard tooth surface features small size, light weight, high bearing capacity, high efficiency, long service life, convenient installation, wide motor power range, fine transmission ratio classification, etc. It can be widely used in equipment that needs to be decelerated in various industries.
sewage treatment, chemical industry, pharmacy and other industries.
| Hardness: | Hardened Tooth Surface |
|---|---|
| Installation: | Horizontal Type |
| Layout: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Step: | Single-Step |
| Type: | Gear Reducer |
| Samples: |
US$ 1780/Piece
1 Piece(Min.Order) | |
|---|
How to Design a Helical Gearbox
Basically, a gear is a rotating circular machine part that has teeth cut into it to transmit torque or speed. Gears operate on a similar principle to levers. However, gears are usually asymmetrical in nature, and they have meshing teeth that work together to transmit torque or speed.
Helix angle
Whether you’re looking for a right angle gearbox or a helical gearbox, the angle of the teeth is an important consideration. It affects contact ratios, radial force and the torque capacity of the gear.
A helical gearbox uses the same basic elements as a spur gear, except it has teeth that are closer together. It is also more suited for high-load applications. It is also quieter than conventional gears. The main differences between a helical gearbox and a spur gear are its pitch and the helix angle.
The pitch of a helical gear is measured in the plane perpendicular to the direction of the teeth. It may also be called circular pitch. The pitch of a helical gear may be greater or less than circular pitch.
The normal pitch of a helical gear is also measured in the plane perpendicular to its direction of rotation. It is often called the reference value.
Unlike the spur gear, a helical gear does not have a unique optimum pressure angle. A helical gear’s contact ratio will decrease as the pressure angle increases. This is due to the fact that the length of the contact line decreases.
The pitch of a helical planetary gearbox can be calculated by dividing the total helix angle of the pinion and gear by the sum of their normal pressure angles. The helix angle is usually between 15 and 30 degrees.
Center distance
During the design of a helical gearbox, the center distance between the gears is a crucial input parameter. The center distance should be accurately calculated and modified based on the actual usage conditions. Undersized center distances cause a gear to mesh at a point other than the pitch point, which can lead to increased noise, premature wear and amplitude modulated vibrations.
The best way to calculate a helical gear’s center distance is to calculate the helix angle. This is often referred to as the fundamental rule of gearing. The helix angle is a mathematical expression that defines the relationship between the transverse and normal planes of the gear tooth. The pitch circle diameter increases with helix angle.
The number of teeth in a gear is also a relevant input parameter. There are a number of considerations to consider for determining the helix angle, such as the tooth depth, the pitch diameter, the number of teeth, and the radii of the index circle. The tooth depth is a useful way to calculate bottom clearance.
During the design of a helical mesh, the radial and axial thrust forces are produced. The angular backlash of a gear may vary depending on the type of gear, the pitch diameter and the transmission ratio. The total length of contact lines varies more gradually with the helix angle.
The number of cross sections in a helical mesh is also important. The radial module form is more economic to manufacture. The helical gearbox can be produced by using the same tooth cutting tools as spur gears.
Backlash
Having a smooth rotation of meshing gears is important. However, backlash is an issue that needs to be addressed. There are several ways of controlling backlash. The amount of backlash required depends on the application, size, and accuracy of the gears.
There are two basic ways of reducing backlash. The first is to decrease the distance between the gear centers. The second is to use spring loaded gears. The latter works better in low torque unidirectional drives.
The difference between the distances is called the transverse contact ratio. The longer the distance, the more rotational motion is required. The angular backlash is the opposite of the radial backlash.
The backlash may also be measured in terms of the angular distance between two gears. This measurement can be converted into an angular value at the operating pitch circle. A worm gear is another example.
Using the correct backlash calculator can determine the correct amount of backlash for your helical gearbox. The amount of backlash depends on the accuracy of the individual gears and the type of gearbox.
The gearbox also has components like pulleys, bearings, and wheels. There are several ways of reducing backlash, including the use of bolts and shims to decrease the center distance between gears. In heavy duty applications, a rigid bolted assembly is common.
To calculate the backlash of a geartrain, one must know the gear ratio of each gear in the train and how much it is mated to the reference shaft. This information is especially helpful for cumulative backlash.
Durability
Optimal design, materials, manufacturing, and maintenance procedures affect the lifecycle of a gear. This includes production, repair and replacement costs. The optimum maintenance schedule must also account for lifecycle costs.
The life of a gear can be extended by proper tooth tip relief. This will reduce wear, improve meshing, and increase the longevity of your gear.
The helical gearbox is a specialized type of gearbox, which transforms power from one right angle axis to another. Typical applications include automotive transmissions. It is a popular choice in applications with high speed, high load, or non-parallel shafts. It is quieter and smoother than spur gears. The modular production method used in helical gearboxes provides the best possible standard for component integrity and performance.
One of the most important components of a helical gearbox is the thrust bearings. These support the thrust forces created by the gears and can absorb some of them. A helical gearbox is best suited for high load applications that require a smooth gearing motion.
A good helical gearbox is one that is manufactured with bearings that can handle axial loading. A helical gearbox with a central gulley is often needed for tool clearance. The helix angle also has a bearing on its durability.
The helix angle is also the source of the largest thrust force produced by a helical gear. This large thrust force is produced by a series of special angle cut teeth. This may be one of the reasons why helical gears have been used in high speed applications.
Noise
Generally speaking, helical gears are considered to be a relative quieter gear than spur gears. It is estimated that a helical gear set with axial contact ratio of 2 is about 19 dB quieter than a spur gear set with the same contact ratio.
The term “whine” is often used to describe the tonal character of gear noise. This is a function of the dynamic forces that act on the gear mesh. The dynamic forces are related to rotational speed.
There are two main types of gear noise: the gear-specific noise and peripheral component noise. Both of these types can be caused by high-speed gears transmitting the power of an engine.
The gear-specific noise may be related to the number of teeth in contact. A low contact ratio can slow down the rotational speed of the driven gear. However, a high contact ratio will not reduce the transmission error. This is why it is important to prioritize your design intent before attempting any noise reduction measures.
The tonal character of gear noise can be determined by collecting and analyzing data over a period of time. This may include a series of tests at loads within the desired load range. This measurement can serve as a starting point for a gearbox’s root cause analysis.
The gear-specific noise has a number of mechanisms. These include the aforementioned transmission error signal and the gear-specific whine.
Applications
Various industries like plastics, printing, cement and other heavy industrial settings use helical gearboxes. Their advantages include low power consumption, quieter operation and high load application. However, there are some limitations. For example, heat generated by sliding contact is a hindrance to efficiency. It should also be noted that gear weight affects the performance of the gear.
There are two ways to mesh helical gears. The first method is to place the shafts oriented at a certain angle of helix, in a mesh. The second method is to place the shafts oriented in a different angle of helix. The difference in angle is referred to as the helix angle.
The helical gearbox is the most widely used gearbox. It is compact in size and works at a high efficiency. It is useful for driving conveyors, coolers and machines. It is also used in automation control systems.
Helical gears are often chosen over spur gears for non-parallel shafts. They are also used in gearboxes for automotive applications and in elevators. They also reduce vibrations.
The gears are made of special teeth that are angled to an axis. They are also cut at an angle. This allows for perpendicular meshing. They can be divided into two basic categories: crossed axis gears and single helical gears. Single helical gears can be right-handed or left-handed. Crossed axis gears are usually used to connect parallel shafts.
editor by CX
2023-04-14
China R47 Right Angle Helical Gear Reductor Belt Conveyor Drives Speed Reducer Helical Gearbox for Textile Industry why helical gears are used in gearbox
Merchandise Description
R47 Correct Angle Helical Gear Reductor Belt Conveyor Drives Speed Reducer helical Gearbox for Textile Sector
|
US $10-99 / Piece | |
100 Pieces (Min. Order) |
###
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Soft Tooth Surface |
| Installation: | 90 Degree |
| Layout: | Helical Gearbox |
| Gear Shape: | Conical – Cylindrical Gear |
| Step: | Stepless |
###
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) |
|---|
|
US $10-99 / Piece | |
100 Pieces (Min. Order) |
###
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Soft Tooth Surface |
| Installation: | 90 Degree |
| Layout: | Helical Gearbox |
| Gear Shape: | Conical – Cylindrical Gear |
| Step: | Stepless |
###
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) |
|---|
NVH Characteristics of Helical Gearbox
Typically, a helical gearbox is used in the transmission of torque, speed, or both. Its primary function is to rotate a circular machine part while simultaneously meshing with other toothed parts. It operates on the same principle as a lever.
Typical applications
Typical applications of helical gearboxes include conveyors, blowers, and elevators. They are also used in the construction of plastics and rubber. Their basic benefits include reduced vibration, lower noise levels, and high load carrying capacity. They are also known to be more durable and quiet than spur gears.
There are several factors that should be taken into consideration when choosing the right gear set for a particular application. These include power requirements, torque requirements, and the environment in which it will operate. Also, bearings and lubricants will need to be considered.
Helical gears are used for heavy load applications, as they provide a high load-carrying capacity. They also are less expensive than spur gears. However, their efficiency is lower than spur gears. This is due to the fact that helical gears have larger teeth. They also have a lower dynamic load than spur gears. This reduces wear and tear on the gears.
Helical gears are also used in high-speed applications. They can also be used with non-parallel shafts. They are typically chosen over spur gears for non-parallel applications. However, helical gears are prone to misalignment due to axial thrust. This can be corrected by adjusting the bearing position.
Helical gears can also be used as power transmitting gears. They are commonly used in transmissions in the automotive industry. They are also used in a wide range of other industrial applications. These include blowers, feeders, coolers, and conveyors. They can also be used in the food and oil industries.
The most common types of helical gearboxes are single and double helical gearboxes. Single helical gears have one helical section that is parallel to the axis. Those with a circular arc curved tooth are also available.
NVH characteristics
NVH characteristics of helical gearbox are a major consideration in the development of new driveline products. NVH can be quantified using wavelet analysis, order analysis and statistical energy analysis. These techniques are typically used in the frequency domain, but can also be used in the real time domain.
The most basic NVH method uses a modal analysis to quantify the transmission noise. Simplified models use sinusoidal stiffness variations, but can also be used to study special effects.
One of the most important aspects of NVH is the integrity of the signal chain. The signal chain is affected by the gear meshing impact and the main transmission housing excitation. The first step in quantifying NVH is to establish a signal chain. This can be done by comparing the signals that are recorded on an analog to digital converter or hard disk. Then, using fast Fourier transforms, signals are converted from the time domain into the frequency domain.
For NVH analysis, it is important to obtain a representative prototype of the production vehicle. This is necessary early in the design phase, as changes to the final product often require substantial design modifications.
For helical gearboxes, the main benefit of reverse module configuration is that the radial type gearbox is more economical to produce. The radial type gearbox uses the same tooth-cutting tools as a spur gear, but can be produced more economically.
The basic characteristics of helical gears are that they have more surface contact and are more powerful in their carrying capacity. Because of this, the helical gearbox is typically used for high-load applications. However, helical gearboxes tend to produce lower efficiencies than spur types.
Thermal deformation of bearings can also change NVH characteristics of a helical gear transmission system. In this study, the effects of bearing temperature rise on the nonlinear dynamic characteristics of a helical gear system are investigated.
Helix
Compared to conventional gears, helical gears have more surface contact and produce less noise. These gears are a great choice for home and light industrial applications, especially where high-efficiency is required.
Helical gears produce axial thrust force through a special lubricant. They are used in different industries, such as automotive, oil, food, plastic, and textile. They are also used in blowers, feeders, and geared motors.
In helical gears, there is a special tooth at an angle to the axis of rotation. This tooth retains contact while the gear rotates into full engagement. Typically, the angle between the helix and the axis of rotation is 15 to 30 degrees. This angle is important for determining the number of teeth.
Compared to a straight cut gear, a helical gear has a higher power to weight ratio. This means that the helical gear can accommodate a higher load.
Helical gears are typically paired, with each gear containing a v-shaped tooth. The v-shaped tooth is designed to allow for a greater contact ratio, while maintaining an acceptable minimum amount of bottom clearance. However, the tooth tip may fracture if it is too thin.
A mathematical definition of the helix angle is important for the design of a helical gear. The helix angle is defined in the section on geometry of helical gear teeth.
The angle between the helix and the axial axis of rotation is used to calculate the axial contact ratio of a gear. This ratio is defined as the sum of the total number of contact lines, or teeth. If the overlap ratio of a gear pair is zero, then the axial contact ratio is also zero.
A helical gearbox can be a highly efficient transmission system, but may suffer from transmission error. This is the result of the axial thrust force, which is dissipated when it enters contact with an opposing tooth. To minimize the amount of power loss in a helical gear box, several approaches have been developed.
Transverse and normal planes of the teeth
Generally, helical gear teeth have two planes: the transverse and normal planes. The normal plane is perpendicular to the pitch plane. The transverse plane is perpendicular to the axial plane.
When a tooth is in contact, the load is normal to the surface at the contact point. This is known as the pressure angle. This angle is a function of the tooth’s radial position on the shaft axis. The angle can also be used to describe the shape of a tooth.
In helical gears, the normal pressure angle is the angle of the load line into the plane normal to the tooth axis. It is important to know the pressure angle when calculating the forces in a helical gear pair. This angle is usually between 15 and 30 degrees.
The helical gearbox is the most widely used gearbox. It consists of a set of helical gears connected by parallel shafts. It is also used in blowers, textile, sugar, and marine applications. It has a higher contact level and less vibration than conventional gears.
Helical gears can be used in feeders, blowers, and rubber and plastic applications. They are quieter than conventional gears, which is especially important in the food industry. They also transfer larger loads. They are also durable and can be used in blowers.
Helical gears have a slanted tooth trace. They are less noisy than conventional gears, which makes them ideal for marine applications. They also transmit rotation smoothly. They have an effective axial thrust force and transmit less vibration. They are used in many industrial applications, including the oil industry and the food industry.
Helical gears on non-parallel shafts have two major circles: the pitch circle and the root diameter. These circles can be different, so different tooth shapes can be used in the radial module system.
Impact of external thrust on helical gears
Considering that gearboxes are often a key component of power transmissions, the impact of external thrust on gearboxes has been investigated. This paper presents a theoretical model, accompanied by experimental measurements. In particular, this paper focuses on the effects of the thrust collar on the transfer path.
The thrust collar has been successfully proven to reduce the axial thrust between helical gears. It also reduces the acoustic impact of the gearbox by attenuating the radiated sound power. This has been accomplished by incorporating a sound damping mechanism that includes Rayleigh damping. The oil film that surrounds the thrust collar is another damping element.
In addition to reducing gearbox vibration, the oil film damping may attenuate coupled degrees of freedom. To test this, a theoretical model of a gearbox equipped with a thrust collar was developed. This model was then used in a gearbox dynamics simulation model to analyze the effects of the thrust collar on the transferpath.
The first partial model shows how the oil film and the radiated sound power could alter the acoustic performance of a gearbox. In particular, the sound pressure levels of exciting frequencies are compared at the top cover of the gearbox in the vertical direction. This was done using an accelerometer.
The second partial model is a simulation of airborne sound from the gearbox housing. This is done using the compound of the motor excitation and the meshing excitation. This is done by measuring the frequency of radiated sound at four different combinations of torque and speed.
In addition, the helical gear has been sliced into an arbitrary number of cross sections. Each gear is then mounted on a shaft, which rotates with a different timing. The helical gear is compared to a corresponding spur gear for comparison. The spur gear has a higher root stress, but its relative contact stress isn’t nearly as big as that of the helical gear.
editor by czh 2022-12-30