EPG has been efficiently accredited by ISO9002 Top quality Administration System, ISO9001 High quality Administration System, API certificate, ISO/TS16949:2002 and ISO10012 measurement administration technique. Possessing amassed precious expertise in cooperating with overseas clients, EPG has established up a complete set of good quality administration technique which is offered with sophisticated inspection and take a look at tools.
forty five Module Large /EPT Cast Girth Ring EPT for Kiln
EPTT amp forging capability
CITICHL is the casting amp forging cEPTTr in central-south EPTT, possessing 50t electric arc furnace, 60t EPTT ladle refining furnace, and 60t VD/VOD refining furnace, and many others. We can pour 350t liquid steel a single time and yields more than 200,000t of higher high quality liquid steel and can create the large top quality metal of a lot more than 260 steel grades such as carbon steel, structural alloy steel and the structural metal, refractory steel and stainless metal of EPTT requirement. The maXiHu (West EPT) Dis.mum weigEPTT of casting, grey casting, graphite solid iron and non-ferrous casting is 200t, 30t, 20t and 205t individually.
The business is the forging cEPTTr in central-south EPTT. It is very EPTTful in forging. The single free forging is 100t(max fat). We can roll rings of diverse EPTs of carbon steel, alloy steel, large temperature alloy and non-ferrous alloEPTTsuch as copper alloy, EPT alloy and EPTTium alloy. The maXiHu (West EPT) Dis.mum diameter is five.5m and single piece of the forging weighs 10t. We have 8400t, 3150t, 1600t, water push and Uncooked 200/one hundred sixty-5000/750 huge-dimensions ring mill of high precision in Asia produced in WAGNER, Germany.
Heat treatment ability
The business is the heat remedy foundation in countrywide EPTTry trade in central and south EPTT, possessing Phi3 times1.6m carburizing furnace, Phi2.3 times17m, Phi2.three times9.5m shaft furnace, 8.5 times13m,5 times15m,six times14.5m,four.five times18m computerized controlled vehicle sort heat treatment method furnace group. We can source the quenched and tempered component more than 45t, the carburizedand quenched EPT and pinion underneath 20t, shaft le5.7m in length and the induced girth ring diameter le5m
Our girth EPTs Functions
Module Selection: ten Module to 70 Module.
Diameter : Min 800mm to16000 mm.
Excess weight : Max one hundred twenty MT one piece.
A few diverse styles: Fabricated steel – solid ring – rolled plate
StXiHu (West EPT) Dis.Hu (West EPT) Dis.rds/Certificates : #8226 UNI EN ISO #8226 AWS #8226 ASTM #8226 AEPTE #8226 DIN
Girth EPT reducing EPTTs
Phi16m CNC hobbing EPTT
Phi12m EPT reducing EPTT (Switzerland)
Phi10m hobbing EPTT (Germany)
Phi4m CNC large velocity hobbing EPTT (Germany)
Phi1.6m Horizontal CNC hobbing EPTT (Germany)
Phi5m CNC profile EPT grinding EPTT (Germany)
Phi2.8m CNC Profile EPT grinding EPTT (Germany)
Phi1.25m CNC Profile EPT grinding EPTT (Germany)
Phi1m CNC Profile EPT grinding EPTT (Germany)
Specs of EPT :
No. |
Item |
Description |
|
1 |
Diameter |
le15m |
|
2 |
Module |
le45 |
|
3 |
EPT |
Forged Alloy Metal, Cast EPTT Metal, Solid Alloy Metal, Cast EPTT Steel |
|
4 |
Structure From |
Integrated, Fifty percent to Half, 4 Parts and A lot more Items |
|
|
five |
Heat Treatment method |
Quenching amp Tempering, Normalizing amp Tempering, Carburizing amp Quenching amp Tempering |
|
|
six |
Tooth Kind |
Annular EPT, Outer EPT Ring |
|
7 |
StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd |
ISO, EN, DIN, AISI, ASTM, JIS, IS, GB |
|
Inspection and Check Define of Girth EPT:
No. |
Merchandise |
Inspection Area |
Acceptance Requirements |
Inspection Phase |
Certificates |
1 |
EPTT Composition |
Sample |
EPT Need |
When Smelting Soon after Heat Treatment |
EPTT Composition Report |
two |
EPT Qualities |
Sample(Examination Bar on the EPT Entire body) |
EPTnical Requirement |
After Heat Treatment |
EPT Qualities Report |
3 |
Heat Treatment |
EPTT Human body |
EPT StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd |
For the duration of Heat Treatment |
Heat Remedy Report Curves of Warmth Therapy |
4 |
Hardness Test |
Tooth Surface area, three Points Per 90 deg |
EPTnical Need |
Following Heat Therapy |
Hardness Teat Report |
Following Semi Finish Machining |
five |
Dimension Inspection |
EPTT Entire body |
Drawing |
Soon after Semi End
Machining |
Dimension Inspection Report |
Finish Machining |
6 |
EPTic EPTT Take a look at (MT) |
Tooth Surface area |
Agreed StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd |
Following Complete EPT Hobbing |
MT Report |
7 |
UT |
Spokes Parts |
Agreed StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd |
Soon after Tough Machining |
UT Report |
After Welded |
Soon after Semi Complete Machining |
eight |
PT |
Defect Region |
No Defect Indicated |
Right after Digging Soon after Welded |
PT EPTrd |
nine |
Mark Inspection |
EPTT Physique |
EPT StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd |
Closing Inspection |
Pictures |
ten |
Visual appeal Inspection |
EPTT Entire body |
CIC’s Need |
Before EPTT (Final Inspection) |
|
11 |
Anti-rust Inspection |
EPTT Entire body |
Agreed Anti-rust Agent |
Prior to EPTT |
Photographs |
12 |
EPTT Inspection |
EPTT Entire body |
Agreed EPTT Sort |
During EPTT |
Images |
FaXiHu (West EPT) Dis.Hu (West EPT) Dis.ties For EPT EPT ring:
No. |
Product |
Description |
1 |
Smelting amp EPTT Ability |
40t ,50t, 80t Series AC Electrical Arc Furnace two times150t, 60t EPTT Ladle Refining Furnace 150t, 60t Series VD/VOD Furnace 20 times18m Big Pouring FaXiHu (West EPT) Dis.Hu (West EPT) Dis.ty We can pour 900t refining liquid steel one time, and obtain EPT poured 600t steel ingots. We can make the high quality metal of a lot more than 260 steel grades as carbon metal,structural alloy metal and the structural metal, refractory metal and stainless metal of EPTT need. The maXiHu (West EPT) Dis.mum excess weight of casting steel, gray casting, graphite forged iron and non-ferrous casting is 600t, 200t, 150t and 20t individually. |
two |
EPT Capacity |
The only 1 in the term, the most technologically EPTd and the biggest specification18500t Oil Press, geared up with 750t.m forging procedure EPTT 8400t Water Push 3150t Drinking water Push 1600t Water Push Phi5m EPT EPT Ring Mill ( WAGNER,Germany) Phi12m EPT EPT Ring Mill We can roll rings of distinct EPTs of carbon metal, alloy steel, higher temperature alloy metal and non-ferrous alloys such as copper alloy, EPT alloy and EPTTium alloy. Max. Diameter of rolled ring will be 12m. |
3 |
Heat Therapy Ability |
nine times9 times15m,eight times8 times12m,six times6 times15m,15 times16 times6.5m,sixteen times20 times6m ,7 times7 times17m Series Warmth Furnace and Warmth Treatment Furnaces phi2. times30m, phi3. times5.0m Collection Warmth Therapy Furnaces phi5. times2.5m, phi3.two times1.5m, phi3. times5.0m, phi2. times5m Collection Carburizing Furnaces amp Nitriding Furnaces amp Quenching Bathes phi2. times30m Nicely Variety CNC EPT Furnaces Phi3. times5.0M Horizontal Fuel Temperature-differential Furnace EPTT-frequency and EPTT-placement Quenching Lathe of Pinion Shaft |
4 |
Machining Ability |
one. ge5m CNC EPT Obligation Vertical Lathes 12m CNC EPTT-column Vertical Lathe 10m CNC EPTT-column Vertical Lathe 10m CNC One-column Vertical Lathe six.3m EPT Duty Vertical Lathe 5m CNC EPT Duty Vertical Lathe |
two. ge5m Vertical EPT Hobbing EPTTs 15m CNC Vertical EPT Hobbing EPTT 10m EPT Hobbing EPTT 8m EPT Hobbing EPTT 5m EPT Hobbing EPTT 3m EPT Hobbing Machining |
three. EPTTorted EPT-precision EPT EPT EPTTs .8m~three.5m CNC Molding EPT EPT EPTTs |
four. Big Uninteresting amp Milling EPTTs 220 CNC EPTr-mounted Boring amp Milling EPTT 200 CNC EPTr-mounted Unexciting amp Milling EPTT a hundred and sixty CNC EPTr-mounted Dull amp Milling EPTT |
FAQ
Q: How about the high quality of your products?
A: Our EPTTs are manufactured strictly according to national and international stXiHu (West EPT) Dis.Hu (West EPT) Dis.rds, and we just take a check on every single gear before supply.
Q: How about the price tag?
A: We are manufactory, and we can give you lower value than individuals trade firms. In addition to, buyers from Created in EPTT can get a price reduction.
Q: Do you provide right after-sale service?
A: Indeed. The guarantee period of time of our EPTTs is one particular calendar year, and we have a skilled right after-sale crew to immediately and totally solve your difficulties.
Q: Do you offer equipment procedure education?
A: Indeed. We can send specialist engineers to the operating internet site for equipment installation, adjustment, and procedure instruction. All of our engineers have passports.