Product Description
Coaxial Helical Gear Motors 1400 Rpm Motor Speed Reducer Gearbox for Manufacturing
Product Description
Components:
1. Housing: Cast Iron
2. Gears: Helical Gears
3. Input Configurations:
Equipped with Electric Motors
Solid Shaft Input
IEC or NEMA Motor Flange
4. Applicable Motors:
Single Phase AC Motor, Three Phase AC Motor
Brake Motors
Inverter Motors
Multi-speed Motors
Explosion-proof Motor
Roller Motor
5. Output Configurations:
Solid Shaft Output
Detailed Photos
Models:
R Series (Foot-mounted): R18~R168
RS Series (Foot-mounted, CZPT Shaft Input)
RF Series (Flange-mounted): RF18~RF168
RFS Series (Flange-mounted, CZPT Shaft Input)
RX Series (1 Stage, Foot-mounted): RX38~RX158
RXS Series (1 Stage, Foot-mounted, CZPT Shaft Input)
RXF Series (1 Stage, Flange-mounted): RXF38~RXF158
RXFS Series (1 Stage, Flange-mounted, CZPT Shaft Input)
RM Series (agitator gearboxes): Specially designed for agitating applications
Features:
1. Compact structure, modular design
2. Single-stage, two-stage and three-stage sizes
3. High reduction ratio and torque density
4. Long service life
5. Can be combined with other types of gearboxes (Such as R Series, K Series, F Series, S Series, UDL Series)
Parameters:
2 Stage or 3 Stage
Installation:
Foot Mounted
Flange Mounted
Lubrication:
Oil-bath and Splash Lubrication
Cooling:
Natural Cooling
Product Parameters
Models | Output Shaft Dia. | Input Shaft Dia. | Power(kW) | Ratio | Max. Torque(Nm) |
R/RF18 | 20mm | – | 0.18~0.75 | 3.83~74.84 | 85 |
R/RF28 | 25mm | 16mm | 0.18~3 | 3.37~135.09 | 130 |
R/RF38 | 25mm | 16mm | 0.18~3 | 3.41~134.82 | 200 |
R/RF48 | 30mm | 19mm | 0.18~5.5 | 3.83~176.88 | 300 |
R/RF58 | 35mm | 19mm | 0.18~7.5 | 4.39~186.89 | 450 |
R/RF68 | 35mm | 19mm | 0.18~7.5 | 4.29~199.81 | 600 |
R/RF78 | 40mm | 24mm | 0.18~11 | 5.21~195.24 | 820 |
R/RF88 | 50mm | 28mm | 0.55~22 | 5.36~246.54 | 1550 |
R/RF98 | 60mm | 38mm | 0.55~30 | 4.49~289.6 | 3000 |
R/RF108 | 70mm | 42mm | 2.2~45 | 5.06~245.5 | 4300 |
R/RF138 | 90mm | 55mm | 5.5~55 | 5.51~223.34 | 8000 |
R/RF148 | 110mm | 55mm | 11~90 | 5.00~163.46 | 13000 |
R/RF168 | 120mm | 70mm | 11~160 | 8.77~196.41 | 18000 |
1 Stage
Models | Output Shaft Dia. | Input Shaft Dia. | Power(kW) | Ratio | Max. Torque(Nm) |
RX/RXF38 | 20mm | 16mm | 0.18~1.1 | 1.6~3.76 | 20 |
RX/RXF58 | 20mm | 19mm | 0.18~5.5 | 1.3~5.5 | 70 |
RX/RXF68 | 25mm | 19mm | 0.18~7.5 | 1.4~6.07 | 135 |
RX/RXF78 | 30mm | 24mm | 1.1~11 | 1.42~5.63 | 215 |
RX/RXF88 | 40mm | 28mm | 3~22 | 1.39~6.44 | 400 |
RX/RXF98 | 50mm | 38mm | 5.5~30 | 1.42~5.82 | 600 |
RX/RXF108 | 60mm | 42mm | 7.5~45 | 1.44~6.65 | 830 |
RX/RXF128 | 75mm | 55mm | 7.5~90 | 1.56~6.47 | 1110 |
RX/RXF158 | 90mm | 70mm | 11~132 | 1.63~6.22 | 1680 |
Packaging & Shipping
Packaging & Delivery
Speed Reducer Worm Gearbox Packaging Details:Plastic Bags, Plywood Cases
Port:ZheJiang /HangZhou
Company Profile
1.More than 35 years experience in R&D and manufacturing, export gear motors & industrial gearboxes.
2. Standardization of the gearbox series
3. Strong design capability for large power & customized gearboxes.
4. High quality gearboxes and proven solutions provider.
5. Strict quality control process, stable quality.
6. Less than 2% of the quality complaints.
7. Modular design, short delivery time.
8. Quick response & professional services.
Customer visiting:
After Sales Service
Pre-sale services | 1. Select equipment model. |
2.Design and manufacture products according to clients’ special requirement. | |
3.Train technical personal for clients | |
Services during selling | 1.Pre-check and accept products ahead of delivery. |
2. Help clients to draft solving plans. | |
After-sale services | 1.Assist clients to prepare for the first construction scheme. |
2. Train the first-line operators. | |
3.Take initiative to eliminate the trouble rapidly. | |
4. Provide technical exchanging. |
FAQ
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set
If you are interested in our product, welcome you contact me.
Our team will support any need you might have.
Application: | Machinery, Industry |
---|---|
Hardness: | Hardened |
Installation: | Horizontal Type |
Layout: | Coaxial |
Gear Shape: | Helical Gear |
Step: | Single-Step |
Customization: |
Available
| Customized Request |
---|
Maintenance Tips to Prolong the Lifespan of Helical Gearboxes
Proper maintenance is essential to ensure the longevity and optimal performance of helical gearboxes. Here are some maintenance tips:
- Regular Inspections: Conduct routine visual inspections to check for any signs of wear, damage, or oil leakage. Detecting issues early can prevent further damage.
- Lubrication: Follow the manufacturer’s recommendations for lubrication intervals and use the correct type of lubricant. Proper lubrication reduces friction and wear between gear teeth.
- Cleanliness: Keep the gearbox environment clean and free from contaminants that could enter the gearbox and affect its performance.
- Tighten Fasteners: Check and tighten any loose fasteners or mounting bolts to ensure the gearbox remains securely in place.
- Alignment: Properly align the gearbox with connected equipment to prevent excessive loads and wear on the gear teeth.
- Temperature Monitoring: Monitor the operating temperature of the gearbox. Excessive heat can lead to premature wear and reduced efficiency.
- Vibration Analysis: Regularly analyze gearbox vibration levels to detect any unusual vibrations that might indicate issues with gear meshing or other components.
- Seal Integrity: Ensure that seals and gaskets are in good condition to prevent oil leakage and contamination.
- Load Considerations: Avoid overloading the gearbox beyond its specified capacity. High loads can accelerate wear and damage.
By following these maintenance practices, you can extend the lifespan of helical gearboxes and minimize the risk of unexpected failures. Regular maintenance not only reduces downtime and repair costs but also contributes to the efficient and reliable operation of equipment.
Impact of Thermal Expansion on Helical Gearbox Performance
Thermal expansion can significantly affect the performance of helical gearboxes due to changes in dimensions and clearances caused by temperature variations. Here’s how it impacts:
1. Misalignment: Temperature changes can lead to differential expansion of gearbox components. This can result in misalignment of gears, shafts, and bearings, leading to increased friction, noise, and reduced efficiency.
2. Lubrication: Thermal expansion can alter the clearances within the gearbox, affecting the distribution and viscosity of the lubricating oil. Inadequate lubrication due to temperature-induced changes can result in increased wear and premature failure.
3. Gear Tooth Engagement: Temperature fluctuations can cause gear teeth to expand or contract, affecting the meshing engagement and load distribution. Inconsistent gear tooth contact can lead to uneven wear and reduced gear life.
4. Bearing Performance: Bearings in helical gearboxes are sensitive to temperature changes. Excessive heat can lead to reduced bearing life, increased friction, and potential seizure, affecting overall gearbox performance.
5. Noise and Vibration: Thermal expansion can lead to changes in gear and component clearances, resulting in altered vibration patterns and increased noise levels. This can impact the comfort of the system and indicate potential issues.
6. Material Fatigue: Repeated cycles of thermal expansion and contraction can lead to material fatigue and stress accumulation, reducing the overall lifespan of gearbox components.
Managing Thermal Effects: Manufacturers design helical gearboxes with considerations for thermal expansion, using materials with low coefficients of thermal expansion and incorporating features like expansion joints or thermal isolators. Proper lubrication, monitoring temperature, and maintaining consistent operating conditions are also crucial in mitigating thermal expansion effects.
Understanding and managing the impact of thermal expansion is essential to maintain the performance, efficiency, and durability of helical gearboxes.
Industries Utilizing Helical Gearboxes
Helical gearboxes find widespread use in various industries due to their efficiency, smooth operation, and versatility. Some of the industries that commonly utilize helical gearboxes include:
- Manufacturing: Helical gearboxes are employed in manufacturing processes for conveyor systems, material handling, and machine tools. Their ability to provide high torque and smooth motion makes them suitable for precision manufacturing.
- Automotive: Automotive applications include power transmission in vehicles, especially in manual and automatic transmissions. Helical gearboxes contribute to improved fuel efficiency and smoother gear shifting.
- Energy Generation: Helical gearboxes are used in power generation systems, such as wind turbines and hydroelectric generators. Their efficiency and load-bearing capacity are crucial for converting rotational motion into electrical power.
- Construction: Construction equipment, such as cranes, excavators, and bulldozers, rely on helical gearboxes for efficient power transmission and control of heavy loads.
- Mining: Mining operations use helical gearboxes in conveyors, crushers, and other equipment for material handling and ore extraction. The durability and high torque capacity of helical gearboxes make them suitable for demanding mining environments.
- Marine: Marine vessels use helical gearboxes in propulsion systems to convert engine power into rotational motion for propellers. Their efficiency contributes to fuel savings and reliable marine operation.
- Food and Beverage: Helical gearboxes are employed in food processing and packaging machinery due to their sanitary design and precise motion control.
- Textile: Textile machinery relies on helical gearboxes for various processes, including spinning, weaving, and dyeing. Their ability to handle varying loads and provide smooth motion is beneficial in textile production.
The adaptability and efficiency of helical gearboxes make them a suitable choice for a wide range of industries, where reliable power transmission, smooth operation, and load-bearing capacity are essential.
editor by CX 2023-11-15