China R Series Helical Gearbox with Electric Motor helical gearbox efficiency

Solution Description

R series Helical Geared Motor Attributes

one. Functions:

1. High performance: ninety two%-ninety seven%

 

two. Compact composition: Modest offset output, two stage and three stage are in the same box.

 

three. High precision: the gear is produced of substantial-quality alloy metal forging, carbonitriding and hardening treatment, grinding process to make sure large precision and secure running.

four. High interchangeability: highly modular, serial layout, robust flexibility and interchangeability.

2. Technological parameters

Ratio 3.forty one-289.74
Enter power .12-160KW
Output torque sixty one-23200N.m
Output speed 5-415rpm
Mounting type Foot mounted, flange mounted, foot and flange mounted, single-stage foot mounted, solitary stage flange mounted, Flange-mounted with extended bearing hub
Enter Technique Flange input(AM), shaft input(Advertisement), inline AC motor input, or AQA servo motor
Brake Release HF-guide launch(lock in the brake release position), HR-handbook launch(autom-atic braking place)
Thermistor TF(Thermistor protection PTC thermisto)
TH(Thermistor protection Bimetal swotch)
Mounting Place M1, M2, M3, M4, M5, M6
Type R17-R167
Output shaft dis. 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm
Housing materials HT200 higher-power cast iron from R37,47,57,sixty seven,seventy seven,87
Housing materials HT250 Large toughness cast iron from R97 107,137,147,157,167,187
Heat treatment technology carbonitriding and hardening treatment method
Performance 92%-ninety seven%
Lubricant VG220
Protection Class IP55, F class

Starshine Generate

ZheJiang CZPT Co.,Ltd,the predecessor was a condition-owned armed forces CZPT organization, was established in 1965. CZPT specializes in the full power transmission remedy for substantial-stop products manufacturing industries based on the purpose of “Platform Product, Application Layout and Expert Provider”.
Starshine have a powerful specialized drive with above 350 personnel at existing, including above thirty engineering professionals, thirty quality inspectors, covering an spot of 80000 square meters and kinds of superior processing equipment and testing equipments. We have a good basis for the business software growth and support of large-stop pace reducers & variators owning to the provincial engineering technological innovation investigation middle,the lab of gear velocity reducers, and the foundation of contemporary R&D.

Our Crew

Top quality Management
Top quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission  
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value

3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection responsible for tracking bad, to monitor the supplier to take corrective 
measures to prevent recurrence.

4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend
 found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.

5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of 
customer expectations and needs.

6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the 
product is a product inspection to determine the qualified products.

7. Certification.

Packing

Shipping

US $100-1,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Agricultural Machinery, Ceramic
Hardness: Hardened Tooth Surface
Installation: Vertical or Horizontal
Layout: Coaxial
Gear Shape: Bevel Gear
Step: Double or Three Steps

###

Customization:

###

Ratio 3.41-289.74
Input power 0.12-160KW
Output torque 61-23200N.m
Output speed 5-415rpm
Mounting type Foot mounted, flange mounted, foot and flange mounted, single-stage foot mounted, single stage flange mounted, Flange-mounted with extended bearing hub
Input Method Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor
Brake Release HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position)
Thermistor TF(Thermistor protection PTC thermisto)
TH(Thermistor protection Bimetal swotch)
Mounting Position M1, M2, M3, M4, M5, M6
Type R17-R167
Output shaft dis. 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm
Housing material HT200 high-strength cast iron from R37,47,57,67,77,87
Housing material HT250 High strength cast iron from R97 107,137,147,157,167,187
Heat treatment technology carbonitriding and hardening treatment
Efficiency 92%-97%
Lubricant VG220
Protection Class IP55, F class
US $100-1,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Agricultural Machinery, Ceramic
Hardness: Hardened Tooth Surface
Installation: Vertical or Horizontal
Layout: Coaxial
Gear Shape: Bevel Gear
Step: Double or Three Steps

###

Customization:

###

Ratio 3.41-289.74
Input power 0.12-160KW
Output torque 61-23200N.m
Output speed 5-415rpm
Mounting type Foot mounted, flange mounted, foot and flange mounted, single-stage foot mounted, single stage flange mounted, Flange-mounted with extended bearing hub
Input Method Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor
Brake Release HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position)
Thermistor TF(Thermistor protection PTC thermisto)
TH(Thermistor protection Bimetal swotch)
Mounting Position M1, M2, M3, M4, M5, M6
Type R17-R167
Output shaft dis. 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm
Housing material HT200 high-strength cast iron from R37,47,57,67,77,87
Housing material HT250 High strength cast iron from R97 107,137,147,157,167,187
Heat treatment technology carbonitriding and hardening treatment
Efficiency 92%-97%
Lubricant VG220
Protection Class IP55, F class

Why Choose a Helical Gearbox?

Choosing a helical gearbox is an important decision for any machine builder. It can help you to reduce maintenance costs, improve productivity and efficiency, and ensure that your equipment operates quietly and efficiently. In addition, it can also be compact in size and easy to install.helical gearbox

High productivity and efficiency

Compared to spur gears, helical gears have high productivity and efficiency. This is due to the fact that the helical gearbox is more effective at transferring power between right-angle configurations. Helical gears are also quieter. They also have the ability to tolerate a greater load. These gears are usually used in high-load applications, such as automotive transmission applications.
The basic features of helical gears include a slanted tooth face, a larger contact ratio, and a smoother performance. Helical gears are also less expensive than spur gears. They have more power carrying capacity, longer life, and are easier to maintain.
There are many factors that affect the efficiency of helical gearboxes. Some of them include the number of stages, reduction ratio, ambient conditions, and lubrication. They are also affected by the number of teeth.
Power loss in helical gears is mainly due to friction and heat. There are various approaches to minimize these losses. One approach is to analyse power losses using a numerical method.
Other factors that affect the efficiency of helical systems include speed, noise, and the number of teeth. The amount of power lost in gear mating is dependent on the load.

Low power consumption

Compared to other types of gearboxes, helical gearboxes have low power consumption. This is because they can tolerate more load, conduct smooth performance, and are quieter. They also require less oil changes and have a longer life span.
Helical gears have special teeth that are cut at an angle. The teeth are designed to engage gradually, rather than quickly. They can transfer power between parallel configurations and right-angle configurations.
Helical gearboxes are the most widely used gearboxes. They are also the most efficient. They can work at 98% efficiency. However, they are more expensive than spur gears. They can be packaged with oil-filled housings. They have less noise and require less maintenance. They can operate cooler, and have more torque capacity.
Helical gearboxes have two types: single and double helical gears. In the single type, the gears are perpendicular to the axis. They are usually used in automotive transmission applications. They can also be used in forward velocities. In the double type, the helical faces are next to each other.
Helical gears work at higher ratios, which increases their efficiency. They are also less noisy than spur gears. They are a good choice for applications that require high torque capacity. The basic efficiency of helical gearboxes ranges from 90% to 99.5%. They are also easier to operate and have a longer life span. They are suited to a wide range of applications.helical gearbox

Compact in size

Having a shiny new set of wheels is a nice change of pace. You get to sit in style and you get to drive it like the pro. The trick is finding the right one at the right time. Fortunately, there are plenty of companies who know how to build a high quality car that can be afforded by the average Joe. You’ll find all types of cars from sports coupes to hatchbacks. You’ll also find all types of drivers from the young professional to the seasoned veteran. You’ll also find all types of roads from main streets to back roads. There are even all types of parking spaces to choose from. With a bit of planning and some research, you’ll find the perfect fit for you and your family. You can’t help but wonder why you didn’t choose a vehicle with this many perks sooner. It’s a nice way to spend a night on the town, without having to worry about a parking fee. The next time you’re in the mood to take the family out to the country for a weekend in the great bluffs, you’ll know which ones to avoid.

Noise-free operation

Compared to spur gears, helical gears have better speed capability and quieter operation. However, helical gearboxes often have problems that stop their service. These faults result in increased productivity costs. These problems include fatigue, chipping tip, crack and missing tooth.
In this paper, we propose a novel signal processing scheme to detect gearbox faults at constant speed. The method involves the use of spectral subtraction (SS) to remove the spectral noise of a signal. This approach is widely used in speech signal processing. It is also used to estimate real-time noise information. The method was successfully applied to the analysis of gearbox faults.
The spectral subtraction technique is applied to the transmission error and to the side-band frequency feature. The side-band frequency is equal to the rotation frequency of the input shaft. A square envelope spectrum method is used to obtain the spectral feature. It was then used to obtain the corresponding fault signal. The method is then compared with experimentally measured noise data.
It is also important to note that the side-band feature is not stable in different noise levels. The optimal demodulation subband selection method is not obvious. However, the proposed method can obtain a stable amplitude value when SNR is low.
Another important factor that reduces noise is the overlap ratio. The overlap ratio is the sum of the transverse contact ratio and the face contact ratio. When the overlap ratio approaches one, the noise is minimized.

Improved performance at high speeds

Whether used in an industrial, automotive or power generation application, helical gearboxes provide a number of benefits over traditional spur gearing systems. These advantages include reduced noise, higher load capacity and smoother operation.
In an effort to reduce noise and improve performance at high speeds, Parker engineers developed a helical gearbox that runs quieter and produces 30-40% more torque than a conventionally modified gear. They also redesigned the entry and exit points of the gear tooth for increased efficiency and strength.
The high-speed helical geartrain has been tested at 5,000 hp power. The tests were performed in the High-Speed Helical Geartrain Test Facility at the NASA Glenn Research Center. The tests were conducted at four different design configurations and at multiple input shaft speeds. These tests included temperature increases from inlet to outlet, fling off temperatures, and power loss of the helical system.
The first step was to improve load distribution of the gear pair. This is done by modifying the microgeometry of each gear. In addition to modifying the microgeometry of each tooth, the length of the contact line was extended. This resulted in a higher tooth contact ratio.
Another option is to modify the straddle-mounted pin of the PGS. This is a complicated task because of spatial constraints. In order to determine whether the pin will have the desired effect, it needs to be tested in real-world tests.helical gearbox

Reduce maintenance costs

Compared to spur gears, helical gears have several advantages, such as less noise and vibration, greater load carrying capacity, and longer life. They also have a reduced maintenance cost.
Helical gears can be divided into two main types: single helical and crossed axis helicals. In the single helical type, two or three teeth connect at all times.
In crossed axis helicals, the shafts are inclined at a variety of angles. These gears are primarily used in non-perpendicular transmissions. They can have very low load carrying capacity, but they offer better strength and speed reduction than spur gears.
The double helical type has two mirrored rows of teeth that are angled. This type of gear is also known as a herringbone gear. It’s a design that’s ideal for non-perpendicular transmissions.
Helical gears are packaged in oil filled housings. They are a space saving gear reducer. They are used in automobile transmissions and other forward speeds. They are also used in industrial gearboxes.
Helical gears can be made of either solid or semi-solid materials. They can be sliced into an arbitrary number of cross sections. This allows the helix to be adjusted to suit the application.
It’s important to choose the right gear for your application. The gear’s design may include the number of teeth, lubricant type, surface treatment, and the tooth angle. It’s also important to choose the right lubricant, because it can affect the noise levels and the efficiency of the gear.
China R Series Helical Gearbox with Electric Motor     helical gearbox efficiencyChina R Series Helical Gearbox with Electric Motor     helical gearbox efficiency
editor by czh 2023-01-02